DSO094 Portable Digital Oscilloscope Dual Channel OSC 0-10MHz with Probe USB Cable

DSO094 Portable Digital Oscilloscope Dual Channel OSC 0-10MHz with Probe USB Cable

Specification:   
- 10M analog bandwidth
- 50M real time sampling rate (per channel)
- Vertical sensitivity 10mV/div - 2V/div (1X probe) or 0.1V/div - 20V/div (10X probe)
- Record length 500 - 8000 points (per channel)
- Trigger position can be adjusted and directed
- Trigger sensitivity 0.2 - 4div adjustable
- Can save 4 sets of waveforms
- With X-Y working mode
- Can be used with jyeLab software to form a virtual oscilloscope

Features:
Vertical:
- Dual channel
- Maximum real time sampling rate: 50MSa/s
- Analog band width: 0 - 10MHz
- Sampling precision: 8Bit
- Record length: 500-8000 point adjustable
- Vertical sensitivity: 2V/Div - 10mV/Div (progressive in 1-2-5 mode)
- The vertical displacement can be adjusted, and the indication is provided.
- Input impedance: 1M /20pF
- Maximum input voltage: 50Vpk (1X probe), 400Vpk (10X probe)
- Coupling mode: DC/AC/GND

Level:
- Horizontal sweep range: 0.2muon s/Div - 10m (min) /Div (progressive by 1-2-5)
- Horizontal position can be adjusted, and with the instructions
- At that time the base is slower than 50ms/DIV automatically into the rolling mode

Trigger:
- Touch: automatic, regular and single
- Trigger source: Ch 1 or Ch 2
- Trigger edge: Rise / fall
- Trigger level adjustable and with indication
- Adjustable trigger sensitivity
- Can be frozen at any time waveform

- Y/X working mode, you can graphically display the relationship between the two signals
- Can save / display up to 4 sets of waveforms
- With USB interface
- Pre installed USB, can easily upgrade the program through the bootloader port
- Rotary encoding switch adjustment parameters, convenient and quick
- The screen waveform can be sent through the serial port to the PC machine
- 128 X 64 LCD display with backlight (can be switched)
- Power supply: 3.7V/1200mAh lithium battery / USB
- Supply current:  300mA @ 3.7V (back light when open)
- Size: 140mm X 70mm X 30mm
- Weight: 190 grams

Application:
- Circuit measurement
- High voltage test
- Automotive electronics, electric vehicle testing
- Power system testing, industrial field electrical testing and testing
- Product quality test
- Electronic professional students training

Note:
- Don't use the oscilloscope to directly measure the power of the city.
- Enter the peak value of the measured signal do not exceed 50V.
- Supply voltage not more than 12V.
- No battery

Video: Click here

Package included:  
- 1 x Digital Oscilloscope
- 2 x Probe
- 1 x USB cable