V16.8 Car Key Programmer T300 Blue T-CODE Diagnostic Service Tool English for Vehicles

V16.8 Car Key Programmer T300 Blue T-CODE Diagnostic Service Tool English for Vehicles

Description:
- Newest Version: 2016 Latest V16.8
- Full Car List Supported
- Language: English(Password 123456)

Vehicle Coverage:  

T300 Vehicle Model        Code:ygg3

Model Place of origin
- for ACURA Japan
- for AUDI Germany
- for ALFA Italy
- for BUCK
- for CHEVROLET
- for CITROEN France
- for CHRYSLER
- for DODGE
- for DACIA USA
- for DAEWOO Korea
- for FORD
- for FERRARI
- for FORD USA USA
- for EXCELLE
- for FIAT Italy
- for GENERAL MOTORS USA
- for GM HOLDEN USA
- for HOND A
- for HYUNDAI Korea
- for ISUZU
- for IVECO Japan
- for INFINNITI Japan
- for INFINNITI CAN-BUS Japan
- for JAGUAR England
- for JEEP
- for KIA Korea
- for LAND ROVER England
- for LANCIA Italy
- for LDV
- for LEXUS Japan
- for LINICOLN USA
- for MAZDA USA Japan
- for MAZDA M6 Japan
- for MERCURY USA
- for VALKSWAGEN
- for MITSUBISHI Japan
- for NISSAN Japan
- for PEUGEOT Franc
- for RENAULT France
- for PROTON
- for PONTIAC
- for ROVER
- for SUBARU England
- for SEAT Spain
- for SKODA Czech
- for SUZUKI Japan
- for SUZUKI
- for TOYOTA Korea
- for TOYOTA
- for VW Germany
 
Introduction:
The Automan T300 transponder key programmer is used for key programming. If you lost your car key. Copy key DIY, It will save much money! Can Do More cars than any other transponder machine.
 
Function introduces of T300 chip key decoder:
Use for key programming. Supporting More cars than any other transponder machine .
- Read the vehicle malfunction code
- Clear the vehicle malfunction code
- Read the system data stream
- Read IMM0/ECU ID
- Fetch the machinery key code
- Clear vehicle key memory
- Program new key
- Read vehicle key login password
- Distinguish types of ECU
- ECU-IMMOBILISER programme
- Read EKA password
- Programme new EKA password
- Programme telecontrol implement
 
Install Steps:
For VW Transponder key matching with 5 digits Login Code
Procedure for adding transponder keys to vehicles with separate Immobilizer box:
(Golf 3, Passat B4, Transporter, Lupo, Sharan)
- Switch ignition ON with new key.
- Select:  Immobilizer -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code). For example, if your Login is 1234, enter 1234 -> Save
- Go to Adaptation
- Enter 01 in "Channel Number"
- Enter
- Enter number corresponding to the total number of keys to be matched, The "Stored Value" is the number of keys currently matched. For example, Enter 2 -> Save
- Switch ignition off and remove key
- Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.
- Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation
- Enter 00 in "Channel Number"
- Enter 0 and Save. This will learn ECU with Immobiliser.
 
 
Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:
(Golf 2004, Passat B5, B6 )
- Switch ignition ON with new key.
- Select:  Instrument -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).For example, if your Login is 1234, enter 01234 -> Save
- Go to Adaptation
- Enter 21 in "Channel Number"
- Enter
- Enter number corresponding to the total number of keys to be matched. The "Stored Value" is the number of keys currently matched. For ex, Enter 2 -> Save
- Switch ignition off and remove key
- Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.
- Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation
- Enter 00 in "Channel Number"
- Enter 0 and Save. This will learn ECU with Immobiliser.

Package List:   
- HOND A-16 Adaptor
- SUZUKI Adaptor
- MITSUBISHI Adaptor
- OBDII-16 Adaptor
- OBDII-16 POWER Adaptor
- AUDI 2+2 Adaptor
- HOND-3 Adaptor
- Nissan OBDII
- Nissan 14
- Nissan adaptor
- Chrysler-1 adaptor
- Chrysler-2 adaptor
- GM-12 adaptor
- OBDII TO BENZ SPRINTER
- ADC 45 Adapter
- Peugeot Adapter