Digital Display Auto Glue Dispenser Solder Paste Liquid Controller Dropper 983A

Digital Display Auto Glue Dispenser Solder Paste Liquid Controller Dropper 983A

Note:Voltage: 220V/110v ,please leave a message. You need pay extra money for 110V.

Description
Professional Precise glue dispenser YDL-983A adopts the latest digital control system,assure timing output consistently.More humanized function, simpler operation, easier coating, lineation and drop, highlight high-quality products,improve production efficiency.This machine can be used on different occasions for long time, service life could be more than 10 years.It’s widely used on electronics, aviation, optics, Chemistry, automobile, Medical treatment,petroleum, Packaging,Jewelry and machinery industry.

- MODEL:YDL-983
- Manual or timer operation modes.
- Digital Display
- Free to set 16 kinds of ways
- Foot pedal controlled.
- Suck-back feature ensure no dripping.
- Designed for wide range of application as EFD, I&J Fisnar.
- Complete with an accessory dispensing kit.
- Timer mode dispensing time 0.01-99.99 seconds.
- Timer mode cycle time 0.1-9.9 seconds.
- Manual mode, materials could be dispensed continuously until operator release the foot pedal.
- This unit need to be connected to air compressor (1.5HP or above).
 
Technical parameters
- Dispensing type: Free to set 16 kinds of ways, with dispensing time display
- Automatic Timing dispensing: 00.01S-99.99S
- Manual timing dispensing: Can dispensing coating, lineation continuously
- Minium dispensing: 0.0001 ml
- Dispensing time interval: 0.1-9.9S(automatic timing function)
- Input voltage: 220V±10% 50 Hz/ 110V±10% 60 Hz（220V for Europe;110V for America,etc)
- Internal voltage: 12V DC/ 24V DC
- Input air pressure: 10-100pSi
- Output air pressure: 1-80pSi
- Overall dimension: 235*225*63mm
- Net Weight: 2.2 Kg

Specifications:
- Size: 23.5 x 15.6x 5.8cm   
- Timer mode dispensing time: 0.01-99.99 seconds
- Timer mode cycle interval: 0.1-9.9 seconds   
- Manual mode dispensing time: Controlled by the foot pedal
- Input voltage: 110V for US/CA/MEX,220V for Eur
- Internal voltage:     24VDC
- Air input: 10-100 psi
- Air output: 1-80 psi

How to use
- Power Switch: putdown light on shows “On”, light off shows "Off"
- Dispensing time display: Display setting time
- Input air pressure pressure governor: First pull out, Reversal is lower pressure,veering is the higher pressure
- Barometer: display range: 0-100pSi
- Vacuum control unit: Reversal is Vacuum pumpback high, veering is the Vacuum pumpback low
- Testing button: During testing, it can replace the foot switch
- Dispensing time dial code button: Display setting time, adopts add andsubtract way 00.01S-99.99S
- Time interval setting dial code button: Display setting time, adopts add and subtract way 0.1S-9.9S
- Dispensing output interface: Connect to dispensing needle cylinder.
- Air pressure input interface: Connect to clean high pressure source
- Dispensing way: 16 kinds of free way
- The foot controller interface: Connect to foot switch
- Power input socket
- Fuse holder

Package Includes
- 1 x 983A Solder Paste Liquid Controller Dropper
- 1 x Foot Switch
- 1 x Hand Switch
- 1 x Dispenser Stand
- 3 x 30cc Liquid Barrels
- 1 x Air Tube to Barrel
- 1 x Air Tube to Air Supply
- 1 x Steel Needle & Plastic Plastic Tips Set
- 1 x Power Cable