Tags: ZQWL-EthRS-Z1 Module
| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $9.98 | $9.77 | $9.47 | $9.06 | Contact US |
AXera PI Zero Module 5MP AI-ISP Camera Module Designed with SoC Chip AX620Q+SC450AI Image Sensor
$67.98
0.5-inch 1024X768 OLED Driver Board High Quality Circuit Board for V760A-5 Wearable Head Mounted Display
$40.24
1PCS SFP+ Dual Mode Optical Module Small Form-factor Pluggable Transceiver Support 10Gbps Transmission with LC Interface
$26.09
Product Description:
- ZQWL-EthRS-Z1 is a light weight,high performance,high stablity serial server module (TTL to RJ45).
- Built-in integrated 2-channel TTL interface,1-channel Ethernet interface(with transformer).Users can connect serial machine and network device.
- 3.3V power supply,2-channel TTL,1-channel network port
ZQWL_EthRS_Z1 User manual & Software
Specification:
- Mode:ZQWL_EthRS-Z1
- Power suppy:3.3V
- CPU:32 bit high performance processor
- Ethernet interface:10M/100M adaptive Ethernet interface,2KV electromagnetic isolation
- TTL:2-channel TTL interface,1-channel direction control,support RS485 communication;baud rate support 600~1024000
- Reset/restore factory settings:with reset/restore factory setting signal
Network characteristics:
- Support static and dynamic IP
- Support netting twine cross connect automatic switching
- The work port,the target IP and the target port can be set
- In the TCP server mode,each TTL supports 4 client connections, and multiple users can manage a serial device at the same time
- Support DNS function
- Support online upgrade firmware function
- It can cross the network segment,switch,router,can work in LAN,also can work on internet
- The support agreement includes ETHERNET,ARP,IP,ICMP,UDP,DHCP,TCP
- Support Modbus TCP to Modbus RTU
Module pin definition:
1.RX1:First channel TTL signal receive
2.TX1:First channel TTL signal send
3.LED1:First channel TTL data transmission indicator signal.When there is no signal,output high level;when there is signal,output low level.
Can connect a LED indicating this channel TTL signal
4.DIR:The second channel TTL direction control
The second channel TTL is taken as RS485,use this pin.
5.RX2:The second channel TTL signal receive
6.TX2:The second channel TTL signal send
7.LED2:The second channel TTL data transmission indicator signal.When there is no signal,output high level;when there is signal,output low level.
Can connect a LED indicating this channel TTL signal
8.CFG:reset/restore factory settings
It is effective if the high level lasts more than 6s.
9.3.3V:3.3V power input
10.GND:power supply ground
11.LINK:network link signal
When the network connection is on there is signal output.
12.ACT:network ACT signal
When the network has data flow there is signal output.
13.RD--:Network receive difference negative
14.RD+:Network receive difference positive
15.TD--:Network send difference negative
16.TD+:Network send difference positive
Package List:
- 1 x ZQWL-EthRS-Z1 Module
