Tags: Tuner Receiver
| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $63.40 | $62.10 | $60.16 | $57.57 | Contact US |
1PCS 3-Meter LC-LC Dual Core Multi-mode OM4 Optical Fiber Cable High Quality 10-Gigabit Optical Fiber Jumper
$30.38
1PCS 2-Meter LC-LC Dual Core Multi-mode OM4 Optical Fiber Cable High Quality 10-Gigabit Optical Fiber Jumper
$24.03
12V Dual Core Semiconductor Cooler Kit Water Cooling Thermoelectric Peltier Refrigerator System DIY
$24.29
Note:The above computer,antenna and other accessories are not included.
Direct sampling RTL-SDR TECHNICAL SPECIFICATIONS
Fully assembled and ready to use
Uses RTL2832U+R820T2 chip set.
[the R820T2 tuner has slightly better sensitivity than the R820T and also works better at frequencies around 1.5 GHz.100% compatible with software for the older R820T.]
100KHz to 1766MHz, operating frequency
1 PPM temperature compensated oscillator (TCXO)
[Accurate tuning and almost zero temperature drift (2 PPM initial offset,1 PPM temperature drift)]
- Covers all HF amateur bands
- Covers VHF & UHF bands from 24-1766MHz
- Up to 3.2 M Sample rate. (~2.8 MHz stable)
- Receiver modes AM, NFM, FM, DSB, USB, LSB and CW
- HF Shortwave Q branch direct sampling
- Note: depends upon the SDR software used with the receiver
- 8-bit ADC giving
- 50 dB dynamic range
- 50 Ohm input impedance
- SMA golden antenna connectors It is also more durable and has lower insertion losses.
- Aluminum enclosure screened panels
- Small size board
- Freeware software
- Independent antenna inputs for Shortwave and VHF
- USB computer connection (mini usb) Powered by common USB
- All specifications subject to change without notice
Receiving LF/MF/HF(0-30 MHz)
The HF band antenna must be connected to the Ant input port
Signal receiving HF band needs to meet the HF Antennas such as Long Wire,Random Wire,Dipole etc.To have a good effect need matching antenna.
The program of SDR # with RTL configured to direct sampling of the signal Q,as shown in the following figure
Operation on VHF and UP:
The UV band antenna must be connected to the Ant input port
By default the RTL-SDR's gain is set to zero.Increase this gain by moving the RF Gain slider up,or by turning on Tuner AGC.
The set includes:
SMA Straight Antenna Adapter
SMA male to female UHF,
SMA male to female BNC
- 1 x Main unit
- 1 x USB cable
- 1 x Storage Box
