Low Cost Vector Network Analyzer VNA DG8SAQ VNWA 3EC 1.3 GHz by SDR-Kits

Low Cost Vector Network Analyzer VNA DG8SAQ VNWA 3EC 1.3 GHz by SDR-Kits

Note:

- When it connects attenuator,it can detect repeater station or walkie-talkie.

- To detect duplexer/antenna/filter,the vector network analyzer needs calibration (3xcalibration kit)before using.But,if it is for signal source,don't need calibration.

Product Description:

- DG8SAQ VNWA 3EC Low Cost Vector 1.3 GHz Network Analyzer by SDR-Kits
- Covering 1 kHz to 1.3 GHz and powered from a PC USB-bus,the VNWA 3EC offers a dynamic range of 90dB up to 500 MHz and better than 50dB above 500 MHz.
- Designed by Professor Thomas Baier DG8SAQ,the VNWA 3EC is used by Professionals,Universities,Research Institutes and Radio Amateurs worldwide since its launch in 2009.
- VNWA Driver and Software runs on all recent Windows 64 bit and 32 bit Operating Systems,including Windows 10,8.1 & 8,Windows 7 and Windows Vista.
- As manufacturer of the DG8SAQ Low Cost Network Analyzer,SDR Kits is committed to supporting Users,providing advice and technical support,regular software updates and facilitating the DS8SAQ VNWA Forum.

Features:
- VNWA 3E can support scan and test S11(return loss)& S21(insert loss).
- Frequency range:1kHz~500MHz;90dB dynamic range;500MHz~1.3G 50dB～60dB dynamic range.
- Strong function,can be taken as signal generator and spectrum analyzer.

Parameter:
- Coverage from 1 kHz to 1300 MHz: Up to 500 MHz with dynamic range of up to 90dB Useful performance up to 1.3 GHz with reduced (50dB) dynamic range and accuracy
- S-Parameter S11,S12,S21 & S22,VSWR,Smith Chart
- Component Measurements Resistance,Admittance Capacitance,Inductance & Quality Factor (Q)
- Time domain & Gating in Time domain - Distance to Fault (DTF) measurement
- Import and Export of Touchstone files (S1P - S2P - S3P)
- Logarithmic and Listed sweep: up to 8192 points with sampling time adjustable from 0.2mS to 100mS
- Network Matching Tool,Complex Calculator & Crystal Parameter tool
- User defined S-parameter calculator - Zplot & Excel application Support
- Basic Spectrum Analyzer - useful up to 100 MHz
- Basic Signal Generator - max RF Output as signal generator -17dBm - no harmonic filtering
- 12 MHz TCXO Master Clock - stability of +/-2 ppm
- Microprocessor: Atmel ATMega 328P with - 16K Flash memory - clocked at 16 MHz
- Connectors: SMA x 2,Mini USB-B
- Power requirement - USB 1.1 or USB 2 Interface 5V DC max 400mA
- Dimensions: Width 10.4 cm,Depth 8.0 cm,Height 4.6 cm,Weight 0.35 Kg
- CE and RoHS Compliant
- VNWA 3E is factory fitted with Breakout board.

Attention: Only DG8SAQ VNWAs manufactured and supplied by SDR-Kits are supported by the VNWA Designer and SDR-Kits to give accurate Measurements.

The DG8SAQ VNWA 3EC offers:
- All VNWA hardware on a single Printed Circuit board for maximum reliability
- High stability 12 MHz TCXO from which all clock signals are obtained
- Redesigned Solid 2mm Anodized enclosure and brass chassis
- Supplied fully Assembled and Tested
- Simultaneous S11 and S21 measurements in one Sweep
- RJ12 socket to provide external VNWA control and VNWA power connectivity
- Reduced Power consumption - DDS switched mode supply
- External VNWA 3 Clock connectivity
- VNWA Reference Clock output: TCXO 12 MHz*x (where x=2 3 4 5 ...8) stability 2ppm Output 1 kOhm impedance,150mVpp
- External Reference Clock input: Recommended external clock: 36 MHz with  a level of between -6dBm...+3dBm/50 Ohms

Supplied complete with:
- 3 pcs Amphenol Connex Calibration Kit consisting of SMA 50 Ohm load,SMA Open/Adapter and SMA Short
- 20cm RG223 Cable for thru Calibration
- Quality USB Cable
- VNWA 3EC "Getting Started" booklet
- 12 months return to base Warranty
- Free Software downloaded from SDR-Kits software support site

Full Specification:
- S-Parameter S11,S12,S21 & S22,VSWR,Smith Chart
- Component Measurements Resistance,Admittance Capacitance,Inductance & Quality Factor(Q)
- Time domain & Gating in Time domain - Distance to Fault (DTF) measurement
- Import and Export of Touchstone files (S1P - S2P - S3P)
- Logarithmic and Listed sweep: up to 8192 points with sampling time adjustable from 0.2mS to 100mS
- Network Matching Tool, Complex Calculator & Crystal Parameter tool
- User defined S-parameter calculator - Zplot & Excel application Support
- Basic Spectrum Analyzer - useful up to 100 MHz
- Basic Signal Generator - max RF Output as signal generator -17dBm - no harmonic filtering
- Power requirement - USB 1.1 or USB 2 Interface 5V DC max 400mA
- 12 MHz TCXO Master Clock - stability of 2 ppm
- Microprocessor: Atmel ATMega 328P with - 16K Flash memory - clocked at 16 MHz
- Connectors: SMA x 2, Mini USB-B Power requirement - USB 1.1 or USB 2 Interface 5V DC max 400mA
- Dimensions: Width 10.4 cm,Depth 8.0 cm,Height 4.6 cm,Weight 0.35 Kg
- CE and RoHS Compliant

Package List:
- 1 x VNWA 3E Vector Network Analyzer
- 3 x Amphenol SMA calibration kit
- 1 x USB cable
- 1 x Coaxial cable
- 1 x User manual