Radiolink RC4GS V3 + R6FG 1312.3FT RC TX RX 5CH RC Receiver Transmitter Built-in Gyro for Car Boat

Radiolink RC4GS V3 + R6FG 1312.3FT RC TX RX 5CH RC Receiver Transmitter Built-in Gyro for Car Boat

New Features on the RC4GS V3 (V2 Upgrade):
- 5 Channels
- 30 models memory storage
- One switch to active the D/R setup
- One switch to active the EPA setup
- One switch to active different mix control
- Timer function for racing and training
- Low power supply voltage of each model can be setup independently
- Support simulator; for Crossfire

Setting simplicity, Fast Response for 5 Channels, 30 Models Memory Storage, Dual Mix Programmable Control, Cruise Control, USB upgrade firmware, Throttle Lock, Voltage Protection, ABS and fail-safe protection, 10 Subsidiary ID, outstanding long range up to 400m/1312.3ft and more features. (Actual control distance is according the local environment)

RC4GS V3 is an ideal partner for all types RC cars and boats in the market including single-engine and twin-engine models such as Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting, Gasoline RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car and other types of RC cars or boats.

RC4GS V3 RC Car Transmitter Features:
- Excellent Anti-interference: Pseudo random algorithm FHSS communication technology makes 5 channels RC4GS with excellent anti-interference ability, control distance up to 400m/1312.3ft.
- 5 Channels: CH3-CH5 can be customized. The middle of the handle SWD switch, user can personalize by changing SWA to SWD.
- 30 Models Memory Storage: Up to 30 models memory can be saved and each model can be set up the name and low voltage alarm separately.
- Dual Programmable Mix Control: Mix control can be programmed with any two channels and you could set one switch to active the different mix control. That's friendly for twin-engine vehicles, such as tanks, boats.
- ABS and Fail-Safe Protection: Anti-lock brake support vehicles do not slip when vehicles brake at corners. All channels' fail-safe values can be set to any value as you need.
- Built in Gyro: Built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
- Real-time Information: RSSI, receiver signal can be display on screen when it works with Radiolink R7FG receiver.
- Superb Ergonomics: The handle shape is more linear and handy with the ergonomic design. The strips on the trigger increase the touching friction. Added Hook, FPV monitor holder hole and tact switch.

RC4GS V3 Transmitter Specifications:
- Channels: 5
- Model: RC cars and boats
- Control Distance: Up to 400m/1312.3ft
- Spread Spectrum: FHSS
- Antenna Length: 106mm
- Model: RC Cars/Boats
- Operating Current: 80mAh-120mAh
- Frequency: 2.4GHz ISM band (2400MHz-2483.5MHz)
- Operating Voltage: 4.8-16.8V DC
- Battery compartments: 25*97*60mm (JST 2Pin connector)
- Screen: 128*64 resolution, LCD back light
- Low Voltage Alert: Yes (Below 4.6V)
- Size: 22.4*17.5*11.6cm
- Weight: 320g
- Compatible Receivers: Radiolink R7FG/R6FG/R6F/R4FGM/R4F/R8EF/R8F

Note:
- 2s-4s lipo battery or 6*1.5AA can be used for RC4GS V3.
- Battery and other items pictured are not included, for demonstration purposes only. Thank you for your understanding!

R6FG Receiver Specifications:
- Channel: 6
- Gyro Inside: Yes
- Model: RC cars and boats
- Control Distance: more than 400m/1312.3ft
- Spread Spectrum: FHSS
- Antenna Length: 200mm
- Work Current: 30mA
- Power Supply: 3.0~15.0V DC
- RF Power: <10dbm
- Channel Resolution: 4096
- Size: 30*20*13mm
- Weight: 6g

Package Included:
- 1 x RC4GS V3
- 1 x R6FG receiver