RFD900X Data Link Set UAV Data Radio Data Transmission Module For PPM SBUS Singal Forwarding GH1*25

RFD900X Data Link Set UAV Data Radio Data Transmission Module For PPM SBUS Singal Forwarding GH1*25

Attention:
The new version of the firmware already supports SBUS remote control signal forwarding. You can download the 3.14 version of the firmware from the official website to update it. You need to download the latest RFDTools-V2.36.zip software to update and configure the firmware. SBUS signal is set to send and receive on the P1.1 port (non-reserved P1.3), check GPO1_1SBUSIN on the ground end, and select the SBUS output type under GPO1_1SBUSOUT for the air end, generally SBUS1 or SBUS1/2.

A single terminal is equipped with a UART cable, suitable for additional pairs and multi-point users. The so-called lock and no lock are just the difference between wiring. You can choose according to the type of flight control plug connected (for Pixhawk commonly uses two types of plugs), other flight controllers or serial communication devices need to DIY wiring.

Description:
RFD900x is a compact wireless data transmission module with excellent performance:
- No distinction between transceiver design, each module is integrated with USB serial chip, USB and UART interface automatic switching, USB priority
- Working frequency range 902-928 MHz, ISM band
- The transmitter circuit is designed with a low noise amplifier larger than 20DB and a low pass filter unit is added
- Adjustable transmitting power, maximum 1W
- Acoustic meter filter is used to filter spurious signal in receiving circuit
- Outdoor communication distance can reach 40km or more (depending on antenna performance and communication rate requirements)
- Air data rates can reach up to 750 Kbps
- Dual antenna interface, support antenna diversity and differential antenna configuration
- Support AT command configuration of local radio station and RT command configuration of remote station
- Module temperature monitoring function, automatic duty cycle adjustment according to temperature to avoid overheating
- PPM remote control signal forwarding (reserved S.BUS forwarding, temporarily not supported)
- Working temperature -40℃ to +85℃
- Size: 33 x 53 x 9.5mm

Parameters:
Performance:
- Communication rate: 12, 56, 64, 100, 125, 200, 224, 500 and 750 kbps
- Indoor distance: 500m-1km
- Outdoor direct viewing distance: 40km or more, depending on antenna performance
- Transmit power: 0 to 30dBm, 1dBm step adjustable
- Receiving sensitivity: >121 at low rate, >TBA at high rate
- Low noise amplifier: >20dB

Characteristics:
- Serial data interface level: standard 3.3V, up to 5V
- Configuration method: AT command, APM Planner, custom configuration tool
- Working frequency band: 902MHz-928MHz
- Spread Spectrum Technology: FHSS (Frequency Hopping Spread Spectrum)
- Serial port baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1000000bps. Some baud rates require firmware support
- Optional antenna: Yagi antenna, ½ wave dipole, ¼ wave monopole antenna
- Compliance Standards: FCC Part 15.247, AS/NZS 4268: 2012

Cyber Security:
- Addressing mode: network ID: 0-255
- Channels: up to 50 FM channels
- Topological network support: point-to-point, asynchronous grid, multi-point synchronization

Power Supply:
- Supply voltage: rated 5V, minimum 4V, maximum 5.5V
- Transmitting current: ~1A (maximum power mode)
- Receiving current: ~60mA

Package Included:
- 2 x RFD900X
- 1 x Micro USB Data Cable
- 1 x UART Connection Cable
- 4 x 915M 5DB Antennas