{"product_id":"arcade-controller-fight-stick-game-controller-arcade-stick-for-mixbox-fighting-game-street-fighter","title":"Arcade Controller Fight Stick Game Controller Arcade Stick for Mixbox Fighting Game Street Fighter","description":"\u003cp\u003e\u003cb\u003eVersion for Mixbox:\u003c\/b\u003e\u003cbr\u003eThe design of the arcade controller is inspired by the WASD layout of traditional computer keyboards. 17mm\/0.7\" square key caps are used. Overall, it is somewhat similar to a laptop keyboard with mechanical switches. It is more suitable for users who are accustomed to computer keyboards (Note: The two ↑ buttons are bound, and their functions cannot be assigned separately).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- It supports for PC, PS3, PS4, NS and Steam Deck. \u003cbr\u003e- Key caps are made of injection moulded ABS. The clamping force of the key caps is large enough, and there will be no keycap ejection.\u003cbr\u003e- The polling rate is 1000Hz, which is 1000 queries per second for 1ms. Due to the mechanical structure of the buttons, key-jitter elimination time is 5-10ms.\u003cbr\u003e- Board for Raspberry Pi uses a GP2040 chip, with architecture for Arm Cortex M0+, 32-bit and dual-core 133MHz.\u003cbr\u003e- Controller for Hitbox supports various game consoles, and some buttons can only be used with specific consoles.\u003cbr\u003e- Hot-swappable buttons, Gateron short red switches and ABS injection molded key caps\u003cbr\u003e- Overall thickness is about 1.7cm\/0.7\" (including buttons). The key caps are approximately 3mm\/0.1\" above the panel. Weight is about 500g\/1.1lb.\u003cbr\u003e- Type-C interface and black matte rear panel.\u003cbr\u003e- Above the bottom panel, there is a faint layer of breathing lights for decoration, and a hint that a device is connected.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGateron short red switches 2.0: \u003c\/b\u003e\u003cbr\u003e- Series: 3-pin\u003cbr\u003e- Total travel: 3.2±0.2mm\u003cbr\u003e- Action travel: 1.7±0.4mm\u003cbr\u003e- Trigger pressure: 50±15gf\u003cbr\u003e- Spring length: 13.5mm\u003cbr\u003e- Lifespan: 60 million\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention:\u003c\/b\u003e\u003cbr\u003e- Not for PS5 or Xbox.\u003cbr\u003e- Pressing keys continuously are not allowed.\u003cbr\u003e- Due to integrated structure of its circuit board, panel and buttons, button mapping is not supported.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Game Controller\u003cbr\u003e- 1 x 1.5m\/4.9ft Type-C Data Cable\u003cbr\u003e- 1 x Spare Switch\u003cbr\u003e- 1 x 22mm\/0.9\" Spare Key Cap\u003cbr\u003e\u003cb\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003cbr\u003e- Customers can contact customer service, provide patterns and pay 6USD for the customization service.\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow to Use:\u003c\/b\u003e\u003cbr\u003eI. Access to Different Game Consoles:\u003cbr\u003e1. Computer host: Press and hold the B key on the game controller, then connect the data cable to a computer, and release the B button. When you first use it, the computer will automatically install a driver, and then you will see a controller for Xbox 360 in the device and printer, where you can test the buttons.\u003cbr\u003e2. For PS4: Press and hold the Y button on the game controller, then connect the data cable to a console for PS4, and release the Y button. Then press the PS button on the game controller once and it will work normally.\u003cbr\u003e\u003cbr\u003eThe corresponding buttons below correspond to different console types:\u003cbr\u003eA=NS, B=Xinput (computer Xbox 360 controller), RT=Keyboard, X= for PS3 and Y=for PS4 (the device has a memory function, the next time you connect to the same host, further operation is not required).\u003cbr\u003e\u003cbr\u003eII. Modes:\u003cbr\u003e1. Press Guide + Start + Down: Neutral (Up + Down = Neutral; Left + Right = Neutral)\u003cbr\u003e2. Press Guide + Start + Up: Up Priority (Up + Down = Up; Left + Right = Neutral)\u003cbr\u003e3. Press Guide + Start + Left: Last Input Priority mode (The mode can be set once and be memorized)\u003cbr\u003e\u003cbr\u003eIII. LS, RS \u0026amp; DP:\u003cbr\u003e1. Press Back + Start + Down: D-Pad mode (default)\u003cbr\u003e2. Press Back + Start + Left: LS (left stick)\u003cbr\u003e3. Press Back + Start + Right: RS (right stick)\u003cbr\u003eAttention: When using emulators for winKawaks to play arcade games, you need to switch the controller to the left\/right stick mode for the emulator to recognize the orientation.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/84330\/84339-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40828591833137,"sku":"84339","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078611583025_watermarked_0.jpg_0.png?v=1767734203","url":"https:\/\/www.thanksbuyer.com\/ru\/products\/arcade-controller-fight-stick-game-controller-arcade-stick-for-mixbox-fighting-game-street-fighter","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}