{"product_id":"dm2325-24v-reducer-motor-380rpm-high-speed-motor-with-driver-usb-can-adapter-for-agv-brushless-servo-foc-planetary-robot","title":"DM2325 24V Reducer Motor 380RPM High Speed Motor with Driver + USB-CAN Adapter for AGV Brushless Servo FOC Planetary Robot","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Intelligent design of the driver, plug and play after replacing the motor, without the need for recalibration and parameter calibration.\u003cbr\u003e- Support firmware upgrade.\u003cbr\u003e- Visualized parameter tuning on the upper computer, which can be used through simple configuration.\u003cbr\u003e- Supports CAN FD function, with a maximum baud rate of 5Mbps.\u003cbr\u003e- Motor speed, position, torque, motor temperature and other information can be fed back through the CAN bus.\u003cbr\u003e- Equipped with dual temperature protection function.\u003cbr\u003e- High speed and high torque.\u003cbr\u003e- Flexible switching of multiple control modes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eReminder:\u003c\/b\u003e\u003cbr\u003e- Please strictly follow the prescribed working environment and the maximum allowable temperature range of the winding when using the driver, otherwise it will cause permanent and irreversible damage to the product.\u003cbr\u003e- Avoid conductive debris entering the interior of the driver, otherwise it may cause abnormal operation of the driver.\u003cbr\u003e- Please check if all components are intact before use. If any components are missing, aging, damaged, etc., please stop using them.\u003cbr\u003e- Ensure correct wiring and secure connection with the motor.\u003cbr\u003e- Do not touch the drive during use to avoid accidents. When the driver outputs high current, there may be heating, please be careful to avoid burns.\u003cbr\u003e- Users are not allowed to disassemble the drive without authorization to avoid damaging it.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003e- Rated voltage: 24V\u003cbr\u003e- Rated phase\/power supply current: 5A\/3.2A\u003cbr\u003e- Peak phase\/power supply current: 13A\/7.5A\u003cbr\u003e- Rated torque: 1.35Nm\u003cbr\u003e- Peak torque: 5Nm\u003cbr\u003e- Rated rotation speed: 380RPM\u003cbr\u003e- No-load maximum rotation speed: 560RPM\u003cbr\u003e- Pole pair: 7\u003cbr\u003e- Reduction ratio: 1:25\u003cbr\u003e- Phase inductance: 75uH\u003cbr\u003e- Phase resistance: 0.2915ohm\u003cbr\u003e- Maximum radial load (live load): 395N\u003cbr\u003e- Outer diameter: 28mm\u003cbr\u003e- Height: 77.6mm\u003cbr\u003e- Motor weight: about 172.2g\u003cbr\u003e- Encoder type: incremental encoder\u003cbr\u003e- Control interface: CAN at 1Mbps (max), FD CAN at 5Mbps (max)\u003cbr\u003e- Parameter adjustment interface: UART at 921600bps\u003cbr\u003e- Control mode: MIT mode, speed mode, position mode\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProtection:\u003c\/b\u003e\u003cbr\u003e- Driver over temperature protection, protection temperature: 120°C, the motor will exit \"enable mode\" for over temperature.\u003cbr\u003e- Motor over temperature protection, set according to usage requirements, it is recommended not to exceed 120°C, otherwise the motor will exit the \"enable mode\".\u003cbr\u003e- Motor over-voltage protection, set according to usage requirements, it is recommended not to exceed 60V, otherwise it will exit the \"enable mode\".\u003cbr\u003e- Communication loss protection, if no CAN command is received within the set period, the \"enable mode\" will be automatically exited.\u003cbr\u003e- Motor over-current protection, set according to usage requirements, it is recommended not to exceed 13A (phase current), otherwise it will exit the \"enable mode\".\u003cbr\u003e- Motor under-voltage protection, if the power supply voltage is lower than the set value, the \"enable mode\" will be exited, and the power supply voltage shall not be lower than 15V.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Motor\u003cbr\u003e- 1 x Driver\u003cbr\u003e- 1 x USB to CAN Adapter Module\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101677\/101677-01.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101677\/101677-02.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":41028993351729,"sku":"101678","price":108.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/1777425673-1.jpg?v=1780375902","url":"https:\/\/www.thanksbuyer.com\/ru\/products\/dm2325-24v-reducer-motor-380rpm-high-speed-motor-with-driver-usb-can-adapter-for-agv-brushless-servo-foc-planetary-robot","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}