{"product_id":"xds2xx-china-made-emulator-programmer-compatible-with-xds200-original-emulator-for-texas-instruments","title":"XDS2xx China-Made Emulator Programmer Compatible with XDS200 Original Emulator for Texas Instruments","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e* It is compatible with original XDS200 emulator for TI\u003cbr\u003e* USB2.0 full-speed interface and USB bus provides power supply\u003cbr\u003e* Supports target board IO voltage from 1.5V to 4.5V\u003cbr\u003e* DSP for TI and microprocessors with JTAG\/CJTAG interface are supported\u003cbr\u003e* Provides software and hardware break-point capabilities and supports real-time mode\u003cbr\u003e* Provides Embedded Trace Buffer (ETB)\u003cbr\u003e* Provides UniFlash programming for TI\u003cbr\u003e* JTAG Reset and Wait-in-reset boot modes using the two EMU pins sampled by the nTRST pin\u003cbr\u003e* Power-on reset boot-modes using the two EMU pins sampled by the TVD signal\u003cbr\u003e* The EMU signaling capability of the XDS560 Rev D is available\u003cbr\u003e* Even when the CCS is not running, it can still provide target board power-down detection and apply boot mode when CCS boots\u003cbr\u003e* 456MHz solution and higher performance\u003cbr\u003e* PCBA adopts the SMT process\u003cbr\u003e* -5 to 65 cycle temperature ramp-up process. And it can also simulate debugging\u003cbr\u003e* Using TPS multi-channel DCDC power supply scheme, the total current is only 140mA\u003cbr\u003e* Five TPD4E002 ESD protection ICs protect each input\/output data cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e* Model number: XDS2xx\u003cbr\u003e* Origin: China mainland\u003cbr\u003e* Simulation voltage: 1.6V\u003cbr\u003e* Simulation frequency: 20MHz\u003cbr\u003e* Supported IDE: for CCS and IAR\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e* 1 x Emulator\u003cbr\u003e* 1 x USB Data Cable\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePorts and Indicator Lights:\u003c\/b\u003e\u003cbr\u003e* USB interface: Hi-Speed USB 2.0\u003cbr\u003e* JTAG\/CJTAG interface: TI-14PIN and CTI20 (2.54mm pitch) available\u003cbr\u003e* LED indicator: Red LED on: XDS2xx boot complete, wait for CCS to load the simulation driver; Red LED off: Simulation driver loading completed (after Launch Target configuration); Green LED flashing: Busy status (emulator and target board data exchange status indication)\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/84581\/84584-01.jpg\"\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSupported Chips:\u003c\/b\u003e\u003cbr\u003e* For C28xxx, C5000, C64x+, C66xx, DaVinci, ARM, Cortex, OMAP3\/4\/5, OMAPL13x, AM18XX, AM33xx, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOperating Environment:\u003c\/b\u003e\u003cbr\u003e1. Development environment\u003cbr\u003e* For Code Composer Studio v6 (eclipse) and Code Composer Studio v5 (eclipse) v5.3 and later, or v5.2 with the latest emulation update for TI\u003cbr\u003e\u003cbr\u003e2. Compatible operating systems\u003cbr\u003e* For Windows XP\/Vista\/7\/8 (32-bit and 64-bit), Windows 2003 Server (32-bit and 64-bit), Linux (for Ubuntu, Fedora, RedHat, etc.)\u003cbr\u003e\u003cb\u003e\u003cbr\u003eFAQ:\u003c\/b\u003e\u003cbr\u003eQ: Is it compatible with the original one for TI?\u003cbr\u003eA: Yes, it is. The official XDS200 clock speed is 300MHz, while XDS2xx's is 456MHz, performance improved by about 20%.\u003cbr\u003e\u003cbr\u003eQ: How does it perform?\u003cbr\u003eA: Its performance is between that of XDS100v2\/v3 and XDS560. It supports what XDS100v2\/v3 supports. And it outperforms in speed and its performance is close to that of XDS560.\u003cbr\u003e\u003cbr\u003eQ: What are its advantages?\u003cbr\u003eA: 1. Inexpensive alternative. 2. Easy to install. 3. Compact, simple and reliable. 4. No need to be replaced for updated DSPs (ongoing support for new DSPs). 5. Increased performance over XDS100.\u003cbr\u003e\u003cbr\u003eQ: What chips does it support?\u003cbr\u003eA: It supports newer chips, but does not support some older DSP chips, such as C24xx and C6713. In fact, the best way is to install CCS6.0, create a new File-\u0026gt;New-\u0026gt; Target Configuration File, select the option for \"Texas Instruments XDS2xx USB Debug Probe\", and then look for the chips it supports in the chip list.\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40828650979377,"sku":"84584","price":71.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078635044913_watermarked_0.jpg_0.png?v=1767728456","url":"https:\/\/www.thanksbuyer.com\/ru\/products\/xds2xx-china-made-emulator-programmer-compatible-with-xds200-original-emulator-for-texas-instruments","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}