SAIS 1.2G 10W 984.3-16404.2FT Wireless Transmitter Receiver Wireless Video Transmitter FPV VTX

SAIS 1.2G 10W 984.3-16404.2FT Wireless Transmitter Receiver Wireless Video Transmitter FPV VTX

Features:
- 1.2G 10W wireless transmitter receiver system
- Imported components
- Portable VTX can be used in cities
- 10000mW transmission power
- 1.2GHz digital display wireless audio and video transmitter receiver
- Transmitter and receiver are used in pairs with the same channel, and the video recorder is used wirelessly
- With good confidentiality, strong anti-interference, small image and sound distortion, and no wiring needed
- Image sound distortion is small and there is no time delay
- For audio and video output devices, including DVD, DVR, camera, IPTV, satellite set-top box, and digital TV set-top box; for surveillance and home audio and video transmission
- Wirelessly received image is clear and stable, with bright color, clear sound quality and without noise
- Support PAL/NTSC video and audio transmission
- Full hardware design: no need to install software, just plug and play. Simple and convenient to use
- Transmission distance: 300m-5000m/984.3-16404.2ft, depending on the using environment
- High-power, long-distance, and enhanced signal transmission
- 8 transmit channels + 12 receiving channels

Functional Characteristics:
This series of wireless audio and video transmission equipment is a product with excellent performance in all aspects. It has a large power margin and low current consumption. And the size is small, the transmission distance is long, and it can be more suitable for various complex practical environments. When using an omnidirectional antenna of 5dB (small antenna made in Taiwan), its transmission distance can be 5000m/16404.2ft in open space. If an external high-gain directional antenna is connected, the transmission distance can be increased by more than 2Km. Even in the case of general urban obstruction, the transmission distance can reach about 600-800m/1968.5ft. In more complex buildings and more walls, the distance can also reach 200-500m/656.2-1640.4ft.

Performance Characteristics:
1. Wireless transmission mode: not require communication cables
2. Synchronous transmission of images and accompanying sound. Compatible with color and black and white pictures
3. Miniaturized, light weight, and easy to carry and to install
4. Quick and timely response: real-time transmission of sending and receiving without delay
5. Adopt frequency modulation mode, with strong anti-interference ability and good image quality
6. High integration, stable and reliable work, and long transmission distance
7. No complex connection is required, and simple and easy to use

Basic Parameters:
- Transmitter: size: 110 x 60 x 18mm/4.3 x 2.4 x 0.7"; weight: 0.22kg/0.5lb (not including the weight of antenna)
- Receiver: size: 130 x 80 x 21mm/5.1 x 3.1 x 0.8"; weight: 0.13kg/0.3lb (not including the weight of antenna)
- Antenna length of the receiver: 170mm/6.7"

Technical Parameters:
- Band: L-band (shortwave)
- 1.2G frequency: 1080-1280 MHZ
- Number of transmitter channels: 8 (4: 1080MHZ, 5: 1120MHZ, 6: 1160MHZ, 7: 1200MHZ, 8: 1240MHZ, 9: 1280MHZ, H: 1320MHZ, and C: 1360MHZ) (the channels depends on your need, use environment and interference situation)
- Antenna input impedance: 50Ω
- Accompanying sub-carrier frequency: Dual accompaniment 6.0MHz/6.5MHz
- Video input impedance: 75Ω
- Audio input impedance: 600Ω
- Working voltage: DC12V
- Operating current: 1200mA
- Output power: 10W
- Working frequency: 1.2G   
- Transmission distance: 5-6KM (Require outdoor high-power and high-gain antenna. Depending on the obstruction and interference conditions, the actual transmission distance will be affected)

Installation Method:
1. The working channel of the receiver and the working channel of the transmitter should be selected consistently.
2. Connect a TV or monitor to the audio and video output of the receiver with an AV cable.
3. Install and rotate the antennas of the transmitter and receiver before plugging in the power.
4. After installing the power adapter, the power indicator will illuminate. After the transmitter and receiver are installed, observe the image output from the receiver. Users can adjust the antenna angle of the transmitter and receiver to achieve better sound and image.
5. Before powering on, please be sure to install the antennas provided by us, and try to keep the antennas upright when using them to achieve a better transmission effect.
6. Please be sure to use our power adapters to avoid damage to the devices.
7. This product adopts L-band frequency, four channels, to transmit audio and video signals, with good anti-interference performance. This product solves the black screen of the receiver output image caused by high-power walkie-talkies and other voice communication equipment interfering with traditional video transmission equipment.
8. It has upgraded its circuit. It adopts a new encryption chip circuit, and ordinary conventional receivers on the market cannot normally receive the image content transmitted by our product.

Package Included:
- 1 x Transmitter
- 1 x Receiver
- 1 x 12V 1A Power Adapter (for Receiver)
- 1 x 12V 2A Power Adapter (for Transmitter)
- 2 x Antennas
- 1 x AV Cable
- 2 x Adapter Cables
- 1 x Back Clip
- 1 x User Manual

Note:
- The larger the transmission power, the relative size of the product, the farther the signal transmission distance. Therefore, when it is working, the temperature of the product is relatively high.
- Due to the large power of the transmitter, the heat generation is higher, which is normal! Users can cool down by installing cooling fans, installing aluminum shells, using thin wooden panels to wrap, heat insulation bags, etc.
- Please use the original antennas for the transmitter and the receiver, and do not use other antennas, otherwise the transmitter will not work properly.