T862++ Infrared BGA SMD Rework Station IRDA Soldering Welder Heat Machine 110V/220V

T862++ Infrared BGA SMD Rework Station IRDA Soldering Welder Heat Machine 110V/220V

Introduction:
- The T-862++ uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.
- Unlike Air Re-Work systems, The T-862++ uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.
- Infrared soldering technology with independent exploration capabilities via three (3) focus lenses which are included with the package.
- Technician focused infrared heat is easy to target most component removal/replacement and re-work.
- The Workstation has a 120 X120mm a 650W controlled Pre-heating System.
- Infrared heat source bulbs are long-lived, in-expensive and easily replaced.
- Processor controlled set-point regulated temperatures with thermocouple feed-back.
- Integrated and adjustable Infrared (IR) eye protection.
- Can suitable for the entire component, especially Micro BGA component.
- The T-862++ system also contains a temperature controlled touch-up iron and stand.
- Extra soldering tools are not necessary to solder/unsolder and re-work Surface MountTechnology (SMT) components 15-35mm in size
- Training is illustrated in factory provided video.
- 2 years free warranty and life time free maintenance service

 
Feature:
- Infrared soldering technology with independent exploration capabilities via three (3) focus lenses which are included with the package.
- Technician focused infrared heat is easy to target most component removal/replacement and re-work.
- The Workstation has a 120 X120mm a 650W controlled Pre-heating System.
- Infrared heat source bulbs are long-lived, in-expensive and easily replaced.
- Processor controlled set-point regulated temperatures with thermocouple feed-back.
- Integrated and adjustable Infrared (IR) eye protection.
- Can suitable for the entire component, especially Micro BGA component.
- The T-862++ system also contains a temperature controlled touch-up iron and stand.
- Extra soldering tools are not necessary to solder/unsolder and re-work Surface MountTechnology (SMT) components 15-35cm in size
- Training is illustrated in factory provided video.
 
Technical Parameters
- Working Voltage: AC110V/220V /60Hz
- Output power: 800W
- Infra-red lamp body temperature adjustable: 100-350
- Preheating dish temperature adjustable: 60-200
 

What you will get
- T-862++ Chassis:1
- PCB Board holder:
- 936 Searing-iron:1
- 936 searing-iron rack:1
- Lamp Body and Lens(D=28mm):1
- Lens(D=38mm):1
- Lens(D=48mm):1
- Eye protection(IR Filter):1
- Cell guide:1
- Focus holder:1
- Focus holder control knob:1
- Fasten nut for focus holder:1
- Steady ring:1
- Fasten nut for steady ring:1
- Power Cable (110VAC):1
- 5mm Fuse, 10A 250VAC(Spare):1
- CD User Manual w/Video:1