|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$173.08||$169.55||$164.25||$157.18||Contact US|
Tarot Iron Man 650 Foldable 3K Carbon Fiber Quadcopter Frame+Gopro 2-Axis Brushless Gimbal
Brand new and high quality
Tarot Iron Man 650 Rack adopts Toray 3K carbon fiber cloth woven carbon fiber board with 3K hollow twill pure carbon fiber carbon fiber tube(non-3K glassy carbon tube) CNC machining,design standards higher than similar products, the full set of rack weighs only 476 grams. Full folding design, installation designed for users with high portability requirements,the user can flexibly according to the weight of the loaded photographic equipment adjust the center of gravity. Particularly suited to do surveillance, remote sensing, mapping, aerial reconnaissance, fire observed explore life cable line patrol, farm monitoring, and other the mobile performance requirements equipment. You may need other Tarot Quadcopter for your other options and comparison.
- Japanese 3K carbon, CNC cutting
- Design standard is higher than most similar products of this range.
- Folding design, meet the needs of customers who *have high demand on portability.
- Front mounting gimbal design (gimbal not included), and position adjustable along the beam.
- Battery mounting position also adjustable, so you can adjust the whole system gravity easily.
- About 50% pre-assembled.
- Rotor spacing: 650mm
- Frame weight: 476g
Suggested setting (not included):
Setting 1, Gopro camera plan (recommended):
180 to 250W motor + 20A ESC + 4S 5000mAh Lipo + 10 to 12 inch propellers
Setting 2, Micro SLR camera plan (cautiously recommended):
300 to 400W motors + 30A ESC + 4S 5000 to 10000mAh Lipo + 12 to 14 inch propeller
Not recommanded to use SLR cameras for this quadcopter
1. Support GOPRO Hero3 video auxiliary output
2. Support the supply voltage polarity protection and voltage compensation
3. Support the motor drive end short-circuit protection
4. Support for custom initial pitch angle
5. Support sensitivity parameter adjustment and software 3D pose show
6. The Support rocker rate mode and position mode
7. Support Receiver: conventional receiver. S-BUS receiver. DSM2/DSMJ/DS MX receiver
8. Support for remote devices: PPM/PCM/2.4G
9. The working voltage: DC 7.4V ~ 14.8V (Recommended 12V. three lithium battery)
10. Working current: 200mA-500mA (power supply voltage and the motor related)
11. The working environment temperature: -15 â„ƒ ~ 65 â„ƒ
12. The processor: Dual 32-bit high-speed ARM core processor
13. The sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three
14. The maximum angular rate: 2000 ° / sec
15. The maximum acceleration: 16g
16. The control frequency: 2000Hz
17. The motor drive frequency: 20KHz (no noise smoothing driven)
18. The control accuracy: 0.1 °
19. The control angle range: -45 ° ~ 45 ° (roll). -135 ° ~ 90 ° (tilt)
20. Pose solver algorithms: PTZ dedicated brushless motor decoupled EKF algorithm
21. For shooting equipment: GOPRO Hero
- 1 pcs * TAROT IRON MAN Foldable Quadcopter Frame
- 1 pcs * 2-Axis Brushless Gimbal