TDA8954 Stereo 2.0 Channel Class D Power Amp Digital Amplifier Board 210W+210W

TDA8954 Stereo 2.0 Channel Class D Power Amp Digital Amplifier Board 210W+210W

Parameters:
- Chip: TDA8954TH
- Type: Class D
- Design: two-channel stereo
- Audio input: differential input or single-ended input
- Power output: 210W + 210W connect (mono BTL) 1 × 420W, RL = 8Ω
- Frequency response: 20Hz-20KHz
- Output impedance: 4Ω-8Ω
- Coupling capacitors: Philips
- Working voltage range:±12. 5V~±42. 5V
- Single terminal the max voltage,can output 2x235W power in 4ohm load.
- As bridge joint,it can output 420W power in 4ohm load.
- uPC1237 alarm delay protection circuit.
- Operating voltage: Dual AC16V-AC28V (RecommendAC±24V or DC voltage:±12.5V~±42.5V)
- Filter capacitor: 1000UF * 10 = 10000UF storage

Features:
- Can be connected to dual-channel OCL (Default) or mono BTL two modes
- Not only support AC power supply, but also support DC power supply, ± 12.5V- ± 42.5V Range
- Can be directly used as pure power amplifier and connected to the power supply will be OK, or connect to Preamp.
- Have a +12V DC voltage output port, can be used for external devices
 
Package include:
- 1 ×   Assembled board
- 1 ×  Audio input cable