Univeral Brake Line Lock Kit Brake Control for Ford Mustang Race Cars YC101398

Univeral Brake Line Lock Kit Brake Control for Ford Mustang Race Cars YC101398

Description:
It is suitable for 12 - 16 volt electrical systems. This high quality solenoid valve can be used for the front or rear brake of a vehicle. It can handle pressure spikes up to 1000 psi.

Features:
- The line lock kits are used for drag races to block the front tires of the car.
- It decreases the possibility of your car turning on the light before the time comes. also locking the front wheels produces a more efficient burn to warm your tires.
- Extensive tests have shown a 10-millisecond release time with vibration resistance up to 30g without mechanical failure.
- On the street or off the road, the line lock can also be used as a temporary electronic parking brake when both the clutch and the brake are needed at the same time.
- The kit allow you to lock your front or rear brake at will.
- Port thread size: 1/8"-27. Please use the white sealing tape on the fitting. The brass fitting is better than the stainless steel fitting.
- For different thread sizes 1/4", 3/8", 1/2" NPT.
- Comes with fuse, indicator, solenoid valve, mounting screws and control button.

Operation:  
1) Step to the brakes.
2) Push the knob on the brake lock.
3) Release the foot brake and it is locked.
4) to release the lock, step on the foot brake and open automatically.
 
Installation:
1) Use two holes to mount the brake lock where it is correctly.
2) in Port (1/8" NPT): connect to the master brake cylinder, it also comes with a 3/16 brake line connection, you can choose to use the installation or not.
3) Port (1/8 NPT): connect to the rear brakes. It also comes with a 3/16 brake line. You can choose to use the installation or not.
 
Note:
- Please note that items will different colors will be delivered at random.
- It must not be used when it is unwanted, or in emergency or long-term brake.