Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $41.31 | $40.46 | $39.20 | $37.51 | Contact US |
USB CNC MDK2 3 Axis TB6560 Stepper Motor Driver Board 3.5A/24V w/Interface for SD Card MPG
Specifications:
- Motor Type: 3 axis controller for stepper and servo motors
- Motor type: Stepper Motor
- Model Number: USB CNC MDK2 -3 Axis–Tb6560
Package Included:
- 1 x USB CNC MDK2 -3Axis –Tb6560 card
- 1 x USB cable
- 1 x CD
Description:
- 3 axis controller for stepper and servo motors
- USB connection
- 100 kHz maximum step frequency
- 12 us minimum pulse width, 50% duty cycle at higher frequencies
- 7 digital outputs on board
- jogging keyboard support
- 8 limit switches with shift feature
- 5 inputs
- MPG pendant support
- Spindle encoder and index signal support for spindle synchronization
- SD card support for running g-code without computer
- control external devices with I2C and UART protocol
- Homing procedure
- Tool change procedure
- Tool length sensor support
- Sensor for capturing and measuring
- digitizing probe support
- Transformation matrix
- Soft limits
- Slave axes
- Backlash compensation
- API
Features:
- USB (V2.x) from PC/Laptop running Windows XP, Vista, Windows 7, 8 or 8.1 (32 bit or 64bit)
- Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep)
- Controller works with most step/dir stepper and servo motor drivers available on the mark
- buffered IO for maximum performance
- advanced interpolation algorithms
- start, stop, pause and resume execution of program on your machine
- Standard RS274/NGC G-code (EMC2 and LinuxCNC compatible)
- advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported
- advanced G-codes - G43, G49 (Tool Length Offsets) supported
- Advanced G-codes - G54, G59.3 (Coordinate System Origins) supported
- tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-co
- Profili 4-axes and 3-axes G-code supported
- import toolpath from DXF files
- import toolpath from PLT/HPGL files
- import toolpath from image files
- import toolpath from NC-Drill (Excellon) files
- import toolpath from Gerber (RS-274X) files
- toolpath simulation
- automatic homing procedure
- advanced toolchange procedures
- automatic tool length measuring
- export toolpath to G-code
- export toolpath to DXF
- SDK (software developers kit) is available
- works on MacOS with virtual machine emulating Window
Note:
- The controller should be powered with an external power supply.
- USB CNC MDK -3 Axis –Tb6560 requires 24V DC supply.
- Power supply should be at least 200mA.
- SD card in the pictures is not included. Thank you!