WiFi Solar Power Outdoor Camera 2MP 1080P PIR Motion Sensor with Solar Panel (Yellow)

WiFi Solar Power Outdoor Camera 2MP 1080P PIR Motion Sensor with Solar Panel (Yellow)

Two-Way Audio. Real-time communication with visitors. Will not miss any visitors anywhere. The camera has a video recording function, and the sound is synchronized when viewing and playing back the video recording screen. Voice intercom during real-time monitoring.

Camera Parameters:
- Master: For Hisilicon Hi3518EV200
- Image sensor: For 2MP 1080P COMS Sensor PS2063 1/2.7
- Video stream: 1920*1080/15fps; 640*360/30fps
- Video mode: normal mode, backlight compensation, infrared night vision, strong light suppression, digital wide dynamic
- Night vision effect: Infrared night vision (black and white screen)
- Infrared distance: 940nm infrared, effective lighting distance is about 10 meters
- Lens: For 2G2P HD lens 4mm horizontal FOV, 120 degrees
- Battery: 2 * 18650 ternary lithium 3.7V battery (Batteries are not included)
- Charging: can be equipped with solar panel charging, support 5V USB port for about 6 hours to fully charge
- Sleep: 15S/30S/60S/do not sleep
- WiFi connection: One-click sound wave configuration 2.4GHz
- AP hotspot: support
- 4G connection: not supported
- Audio encoding: AAC and G.726
- Audio MIC: high sensitivity -38dB
- Video format: MP4
- Operating temperature: -30℃ to 50℃
- Operating humidity: ≤80% RH

Functions:
- Event alarm: support
- Buttons: WiFi/AP hotspot button; reset button/power supply button
- Status indicator: blue & red LED
- Storage: Support TF Card 4GB-64GB and cloud storage
- Video playback: Timeline playback and cloud storage playback
- Waterproof level: IP67
- Two-way intercom: support
- APP mobile phone system requirements: For IOS 10.0, Android 5.0

Solar Panel Parameters:
- Maximum output: 3.3V/1A; output over-source protection; short-circuit protection
- Charging method: Solar charging/external input power charging
- Peak power (PMAX): 3.3W
- Solar charging current: 1000mA
- Supports three booting methods:
1. Detects that the solar output is greater than 0.2W and automatically turns on
2. Press the button to start manually
3.Detect the load and turn on automatically
- Power management function:
1. To prevent from entering an invalid charging state
2. The conversion rate of power output exceeds 91%, which greatly reduces the loss of limited power
- Type of silicon wafer: single crystal efficiency 19.6%
- Number of silicon wafers: 10pcs
- Cable length: 3m cable with micro usb charging head
- Support: M6 screw interface
- Charging completion time: about 3 days in sunny days
- Working temperature: -30℃ to 65℃
- Storage temperature: -30℃ to 65℃
- Waterproof rating: IP66
- Product size: 150 * 220 * 17 mm
- Weight: 415g

Package Included:
- 1 x Set of Solar Power Security Camera

Note:
- Batteries are not included in the package.
- The product does not come with a memory card and hard disk by default. If needed, please purchase separately. Thank you!