ARM Cortex STM32 STM32F407 STM32F407IGT6 Development Board with 3.2 inch LCD display +130W Pixel Camera

- STM32 STM32F407 STM32F407IGT6 Development Board with 3.2 inch LCD display +130W Pixel CameraDescriptionFeature:Processor, the main parameters
- The Cortex-M4 32b MCU + FPU processor maximum operating frequency of 168MHz
- 1 Mbyte of the Flash
- 128 +4 Kbyte of of SRAM
- Support off-chip Flash of SRAM, PSRAM, NOR and NAND Flash
- 8080/6800 model LCD interface
- USB 2.0 high-speed/full-speed device / host / OTG
- 10/100 Ethernet MACs
- Hardware IEEE 1588v2
- CAN (2.0B Active)
- 4 UART
- 3 the SPI up to 30 Mbit
- 2 IIS
-  to 14-bit camera interface up to 48 Mbyte / s
- 1-bit (default), 4-bit and 8-bit SD / SDIO MMC card
- 12-bit 0.5us A / D
- 12-bit D / A
- 17 timers count up to 120MHz frequency
- I / O maximum frequency of 60MHz
- ISP and IAP programming Hardware configuration:
- 16M bit high-speed asynchronous CMOS static RAM
- 4G Bit of NAND the Flash
- IIC EEPROM
- 20-pin 2.54 pitch JTAG interface
- 10/100M Ethernet interface (MII, RMII two configuration mode)
- USB2.0 high speed master-slave device interface (mini)
- USB2.0 high speed host interface
- USB2.0 full-speed master-slave device interface (mini)
- USB2.0 full-speed host interface
- Two-way RS232 interface
- Two CAN2.0 interface
- SD memory card interface (4-bit)
- Audio output and microphone input interface
- LCD Interface 16-bit bus mode
- A controllable LED
- Three buttons with a wake-up function
- An adjustable resistor
- Large coin cell battery holder (because of the air embargo, the default the unworthy button battery)
- Core board 2.54mm pitch I / O pins exports can be installed in Wan with board


 
Software packages - more details please see page PDF document available for download

Network portion of the
Http Web server program - through a web control panel LEDs to the on-board LCD to send data to read the AD value.
Http  the upload - through the network to the local file sent to the SD card  on the development board, you can also view documents and content of the  SD card on a web page, powerful!
UDP or TCP mode  LEDSwitch - through the host computer can control the resources of the  hardware development board, the host computer program VC + + code.
FTP server program - storage media SD card the FTP server program.
SNMP  agent program - through the PC software can be controlled using the  network management protocol development board hardware resources, the  host computer program VC + + code.
Telnet server program - can be controlled through a telnet program on-board equipment, such as the LED.
SMTP client program - you can email to your mailbox!
DNS resolution procedures - such as www.google.com can obtain an IP address 66.249.89.104.
The BSD server / client - BSD socket client and server program.

httpserver  - a web server program use LwIP protocol stack, via the web to control  the development board LEDs and read the AD value.
tftpserver - via TFTP software to upload files to the SD card, you can also download files on the SD card to the PC.
tcp  / udp the echo the server - the way the TCP / UDP echo server program,  through software TCP / UDP to send data to the development board or  obtain development board sent over the data.
the client udp / tcp the echo - echo server to collect the data sent over the development board.
httpserver  netconn - network connection the type netconn the Web server program,  for the FreeRTOS operating system, network protocol stack for the  Implementation of LwIP.
udp / tcp echo the server  netconn - through software TCP / UDP to send data to the development  board or access to the development board over the network connection  type for the echo.

USB section of the
USB  host controller to read and write U disk program - you can create,  read, copy, delete files on the U-disk and format the U disk (USB  Full-Speed).
USB host controller USB keyboard program - keys on a USB keyboard to control the
USB  card reader program - Support SD card, SDHC card support 32-GBytes of  support for FAT12, FAT16 and FAT32 file format (USB high speed).
USB reader NAND Flash program - development board is equivalent to a high-speed USB interface, U disk.
USB  HID device program - available through the PC software to control the  development board LEDs, and access to key state development board.

LCD screen section
LCD chip select chip select (FSMC_NE4) bus way to greatly improve the speed of the scraper
LCD the Blinky procedures - the dynamic image display test program, the center of the LCD screen displays a rotating 3D logo.
emWin  Graphic Library test program - a simple call to map emWin GUI function  frame program (another program with a high-speed animation).

The touch screen parts - LCD touch screen buttons displayed on the LCD screen will change.

The camera section
Camera test procedures - the camera collected video information is displayed on a 3.2-inch LCD screen Processor parameterCore: ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive  real-time accelerator (ART Accelerator™) allowing  0-wait state execution from Flash memory, frequency up to 168 MHz, memory  protection unit, 210 DMIPS/1.25DMIPS/MHz (Dhrystone 2.1), and DSP  instructions•Memories •Up to 1 Mbyte of Flash  memory •Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM  (core coupled memory) data RAM •Flexible static memory controller supporting Compact  Flash, SRAM, PSRAM, NOR and NAND  memories•LCD parallel interface,  8080/6800 modes•Clock, reset and supply  management •1.8 V to 3.6 V application supply and  I/Os •POR, PDR, PVD and  BOR •4-to-26 MHz crystal  oscillator •Internal 16 MHz factory-trimmed RC (1%  accuracy) •32 kHz oscillator for RTC with  calibration •Internal 32 kHz RC with  calibration •Sleep, Stop and Standby  modes •VBATsupply for RTC, 20×32 bit backup registers +  optional 4 KB backup SRAM•3×12-bit, 2.4 MSPS A/D  converters: up to 24 channels and 7.2 MSPS in triple interleaved  mode•2×12-bit D/A  converters•General-purpose DMA:  16-stream DMA controller with FIFOs and burst  support•Up to 17 timers: up to  twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM  or pulse counter and quadrature (incremental) encoder  input•Debug  mode •Serial wire debug (SWD) & JTAG  interfaces •Cortex-M4 Embedded Trace  Macrocell™•Up to 140 I/O ports  with interrupt capability •Up to 136 fast I/Os up to 84  MHz •Up to 138 5 V-tolerant  I/Os•Up to 15 communication  interfaces •Up to 3 × I2C interfaces  (SMBus/PMBus) •Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816  interface, LIN, IrDA, modem  control) •Up to 3 SPIs (37.5 Mbits/s), 2 with muxed  full-duplex I2S to achieve audio class accuracy via internal audio PLL or  external clock •2 × CAN interfaces (2.0B  Active) •SDIO  interface•Advanced  connectivity•USB 2.0 full-speed device/host/OTG controller with on-chip  PHY •USB 2.0 high-speed/full-speed device/host/OTG  controller with dedicated DMA, on-chip full-speed  PHYand ULPI •10/100 Ethernet MAC with dedicated DMA: supports  IEEE 1588v2 hardware, MII/RMII•8- to 14-bit parallel  camera interface up to 54 Mbytes/s•True random number  generator•CRC calculation  unit•96-bit unique  ID•RTC: subsecond  accuracy, hardware calendar

Package included
-  STM32F407IGT6core boardx1
- STM32F407IGT6developer boardx1
- 3.2-inchtouch screenmodule x1
- 130Wpixelcamera module x1
- Serialextension cord x1
- High SpeedMiniUSB cable x1
- Power cable x1
- data CD x1