|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$2,940.00||$2,880.00||$2,790.00||$2,670.00||Contact US|
CineStar-8 RED Epic FS100 C300 FPV Carbon Fiber Multi-Rotor Octa Copter
- VIBRATION ISOLATION SYSTEM Fully adjustable, patent pending vibration isolation system ensures smooth and stable footage in real life filming conditions.
- CAMERA GIMBAL MOUNTING PLATE Mounting plate allows for quick and easy mounting/unmounting of the camera gimbal for travel.
- QUICK RELEASE BOOMS CineStar booms disconnect quickly and easily for fast packing and a small footprint. Our customers fly almost as much as the CineStar, and making packing/unpacking easy is a priority.
- TOP MOUNTED BATTERY In addition to providing ease of access to the battery and optimal CG (center of gravity) for best flight performance, the top mounted battery creates a structural cage around the sensitive flight control electronics.
- THREADED INSERTS / NUTS The CineStar line uses threaded inserts in the carbon fiber plate to make assembly/disassembly a breeze. This design ensures that you only need to hold one tool at a time. Never again will you need to hold a lock nut in place with needle nose pliers in a poorly lit hotel room!
- GPS/NAVI MOUNTING BRACKET It is important to keep the sensitive GPS and Navi board away from any stray electromagnetic interference. For this reason, the CineStar includes an optional GPS/Navi mounting bracket that allows you to mount these circuit boards out on a boom away from other electronics.
- LANDING GEARThe CineStar makes use of a 3 point landing gear system for maximum stability on takeoff and landing. The carbon fiber landing gear is triangulated and extremely rigid, so that it can protect your valuable payloads.
Parts for the assembly of the CineStar-8 carbon fiber frame kit. These parts are also included in the CineStar-8 Basicset.
- 2pcs. Center hub (press nuts installed)
- 6pcs. Landing gear assembly (press nuts installed)
- 1pcs. Lipo battery tray
- 1pc. Camera mount attachment plate
- 8pcs. Motor mount plates (press nuts installed)
- 16pcs. "Dog bone" motor mount washers
- 2pcs. "Dog bone" GPS mount washers
- 12pcs. Cut carbon fiber for Vibration dampening brackets
- 12pcs. Silicone dampeners
- 60 M3x6mm pan head screws
- 8 M3x8mm pan head screws
- 84 M3x40mm button head screws
- 4 pcs 50mm Hexa stand off bolts
- 82 Frame clamps
- 8pcs 450mm Carbon fiber booms