• DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft
  • DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft

DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft

Availability: Out Of Stock

  • Price:$11,200.00
  • Price in reward points: 112000 Reward Points: 1120
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $10,976.00 $10,752.00 $10,416.00 $9,968.00 Contact US
Quantity:

DJI Ace Waypoint Autopilot System for RC Helicopter Multicopter Aircraft


DJI Ace Waypoint is based on DJI 4th generation autopilot system in total autonomous flight with Ground Control System (GCS) which easily sets, edits and confirms flight waypoints for the mission utilizing 3D map in real time in flight feedback. It is designed for high-end commercial/industrial type RC helicopters targeted at Beyond View Range (BVR) in aerial photography (AP), exploration, land survey, geographic mapping, first aid deployment, agriculture, electrical power line inspection and other monitory missions. Ace Waypoint ensures stability and safety of flight while allowing pilot to pay attention to mission objectives using GCS system.    

It works on all kinds of helicopter from Bi-blade to Multi--blade rotorcrafts; with or without flybar; various swash plates and rotor heads; electric or gasoline powered engines.

Specifications:

Supported Helicopter Electric and fuel powered
Supported Swashplate Normal
Three Servo 120° / 140° / 90°
Four Servo 90°
(All the types are fine tuning supported)
Supported Servo Output * 500Hz (760us) / 200Hz (1520us)
for Rudder Channel;
Others depend on your receiver output.
Recommended Transmitter 1 — PCM or 2.4GHz
2 — Minimum 7 channels
3 — Failsafe function available on all channels
Recommended Power Supply DC 4.8~8.4V
(Not be exceed MAX operating voltage of servo motor) More than 2000 mAH capacity Discharge current more than 5C No separate servo power supply required
Operating Temp -20°C to +70°C
Power Consumption MAX 5W
(0.9A@5V, 0.7A@5.8V, 0.5A@7.4V, 0.4A@8V)
Built-In Memory 4GB Flash Memory for flight information recording
Assistant Software System Requirement Windows XP / Windows Vista / Windows 7
Hovering Accuracy Vertical : ± 0.5m
Horizontal : ± 1m
Suitable Wind Condition < 8 m/s (17.7mph)
Forward / Backward
Left / Right
± 72 km/h (44.74 mph)
± 56.7 km/h (35.77 mph)
Acceleration Ascent / Descent Adjustable via ACE ONE ASSISTANT software,can be limit by user precisely
Weight <= 150g (The devices on helicopter)
Dimensions Main Controller : 61 mm x 39.6 mm x 15.8 mm
IMU : 40 mm x 31 mm x 26 mm
GPS & Compass : 50 mm (diameter) x 9 mm
Built-In Functions Autopilot / Tail Gyro / Flybar-less / Engine Speed Control / Gimbal Stabilization / Fail-safe Go-Home
Packaging List Main Controller × 1
IMU × 1
GPS & Compass Module × 1
Micro USB Cable × 1
3-PIN Servo Cable × 10
Product CD × 1
Quick Start Manual × 1
Warranty Info Card × 1

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha