10MHz OCXO Frequency Standard Reference Module Board 10MHz 2.5M 1M 100K 10K 1K 10Hz 2Hz For Radios

10MHz OCXO Frequency Standard Reference Module Board 10MHz 2.5M 1M 100K 10K 1K 10Hz 2Hz For Radios

Thermostatic Crystal Oscillator Module Description:
The frequency accuracy of this module output 10MHz signal (+/-200ppb), there are two signal outputs, one is a standard 10MHz sine wave signal, the other is a 10MHz frequency multiplier signal.

The frequency division signal has 16 selection frequencies. It is through the P5 code switch to select different frequency divisions. Use the RV1 potentiometer to correct the deviation of the 10Mhz output frequency (+/-2.0ppm).

1. P1: Power input interface; (7~9V 500MA).
2. P2: 10MHz sine wave signal output interface; (10Mhz amplitude: 2.5Vpp) SMA interface
3. P3: 10MHz N-frequency pulse signal output interface; (10Mhz/N amplitude: 5Vpp) SMA interface
4. RV1: Correct the deviation of 10Mhz output frequency (+/-2.0ppm)
5. Selection of P5 code switch:
00: A3=0, A2=0, A1=0, A0=0, OUT = 2.5MHz
01: A3=0, A2=0, A1=0, A0=1, OUT = 2.0MHz
02: A3=0, A2=0, A1=1, A0=0, OUT = 1.0MHz
03: A3=0, A2=0, A1=1, A0=1, OUT = 500KHz
04: A3=0, A2=1, A1=0, A0=0, OUT = 200KHz
05: A3=0, A2=1, A1=0, A0=1, OUT = 100KHz
06: A3=0, A2=1, A1=1, A0=0, OUT = 50KHz
07: A3=0, A2=1, A1=1, A0=1, OUT = 25KHz
08: A3=1, A2=0, A1=0, A0=0, OUT = 20KHz
09: A3=1, A2=0, A1=0, A0=1, OUT = 10KHz
10: A3=1, A2=0, A1=1, A0=0, OUT = 5KHz
11: A3=1, A2=0, A1=1, A0=1, OUT = 1KHz
12: A3=1, A2=1, A1=0, A0=0, OUT = 100Hz
13: A3=1, A2=1, A1=0, A0=1, OUT = 50Hz
14: A3=1, A2=1, A1=1, A0=0, OUT = 10Hz
15: A3=1, A2=1, A1=1, A0=1, OUT = 2Hz

0 = connect directly to ground(L)
1 = connect directly to VDD(H)

Package Included:
- 1 x Frequency Standard Reference Module