3-30MHz 5-100W SWR Meter Shortwave SWR Power Meter PWR SWR Meter with 5 LED Indicator Lights

3-30MHz 5-100W SWR Meter Shortwave SWR Power Meter PWR SWR Meter with 5 LED Indicator Lights

Description:
The shortwave SWR meter is powered by RF connector, with five LED indicator lights. No batteries are required, and it is easy to carry. SWR meter is a device that measures radio frequency signals, using 5 LEDs to indicate the strength of the signal, and different colors to indicate different SWR ranges. It is used to measure and display the signal-to-noise ratio of shortwave radio signals in the frequency range of 3-30MHz. The input power does not exceed 100W, and the smallest LED (> 1.0 corresponds to green light) can turn on when the power is 5W. It is suitable for various shortwave radio equipment.

Features:
1. Compact and lightweight. Powered by RF connector and no battery required. Easy to carry. It is very suitable for radio amateurs to use in the field.
2. It can be used to measure RF signals. It uses 5 LEDs to represent the intensity of the signal, and different colored LEDs to represent different SWR ranges.
3. It is used to test the signal-to-noise ratio of shortwave radio signals in the frequency range of 3-30MHz. The input power does not exceed 100W, and the smallest LED (> 1.0 corresponds to green light) can turn on when the power is 5W. It is suitable for all kinds of shortwave radio equipment.
4. The equipment is commonly used in radio communication systems such as radio broadcasting, television broadcasting, radio communication, etc.
5. It helps operators to determine the strength of the signal and thus adjust the settings of the radio equipment to improve the quality and reliability of the signal.
6. There are no components that need to be adjusted in the whole circuit. It can work normally as long as it is connected correctly. IN is the RF input, and OUT is the RF output. The IN connector is connected to the RF ANT, and the OUT end is connected to your antenna.
7. It can be used in the shortwave range without any calibration and adjustment, which is very simple and convenient for DIY enthusiasts.

Specifications:
- Item name: SWR Meter
- Material: Metal
- Frequency of use: 3-30MHz
- Max. power: not more than 100W
- Insertion loss: <0.3dB
- Very shortwave: < 1.2
- Interface: M female
- Dimensions: 25mm x 25mm x 50mm/1" x 1" x 2" (without M-base)

Package Included:
- 1 x SWR meter

Packaging Details:
- Package size: 80 x 30 x 50mm
- G.W.: 0.15kg