4 Axis CNC Kit USB 4-Axis TB6600 Driver+4pcs Nema23 Stepper Motor+ 1pc Handwheel+1pc Power Supply

4 Axis CNC Kit USB 4-Axis TB6600 Driver+4pcs Nema23 Stepper Motor+ 1pc Handwheel+1pc Power Supply

Package Included:
- 1 x USB 4 Axis –TB6600 Driver
- 4 x Nema 23 Stepper Motors
- 1 x Handwheel
- 1 x Power Supply
- 1 x USB Cable
- 1 x CD

Features:
1. Support for 4-axis linkage ,you can connect four stepper motor drives or servo drives
2. Maximum step –pluse frequency is 100KHZ, which is suitable for the servo or stepper motor
3. 4 general purpose opto-couplers isolation input: can connect the limit switch, emergency stop switch .auto tool zero, home switch, etc.
4. Support for connecting electronic handwheel;
5. Have 0-10V signal output, you can use mach3 software to control the spindle motor speed.
6. 4general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
7. 1 status LED, indicate connection status on the board.
8. Resolution 1, 1\2, 1\8, 1\16 micro stepping output;
9. Four (or three) channels 3.5A adjustable output current for 2/4 phase bipolar stepper driver;
10. Build with 4 outputs and 5 inputs.

Basic Connection Diagram:



Nema 23 Stepper Motor 57:
- Step Angle (degrees): 1.8 deg.
- Holding Torque: 1.8Nm
- Phase: 2
- Current / Phase: 4
- Size: 57*57*76
- Shaft Diameter: 8mm
- Wiring Configuration: 4-Wire Bipolar
- Application: 3D printer, Robotics, Reprap project and CNC machine

Note: SD card in the pictures is not included. Thank you!