BT-Z2 Computer Speaker Headphone Switch Audio Switcher Speaker Headset Switch With PC Volume Control

BT-Z2 Computer Speaker Headphone Switch Audio Switcher Speaker Headset Switch With PC Volume Control

Attention:
- It cannot be connected to a microphone.
- When using headphones, please note that the wire-controlled headphone interface can only fit standard computer headphones by default. It fits Chinese 3.5mm headphones. When using European standard mobile phone headset, and human voice is unclear, please press and hold the microphone mute switch on the headset to use it normally. When used with a mobile phone headset cable, it can only listen to music and does not support voice functions.


Precautions:
- Connect the green connector to your computer and the black connector to speakers. If it is reversed connected, there will be no sound from your headset and the switch will fail to work.
- Some speakers do not have an audio input interface and only have one cable. Please use a universal adapter. Connect the speaker cable to the universal adapter first, and then connect the adapter to the black connector pictured above.

Main Functions:
1. You can switch the sound between headphones and speakers. If you want to listen to the sound with headphones or speakers, just press Mode Switch button.
2. Volume of computer output sound can be controlled, and volume of headset can be controlled.
3. Earphones can be connected to the side headphone port, so you don't need to plug the earphones to your computer again and again.
4. Audio Input port can also be connected to other products to play music. No need to unplug speaker audio cable from a computer and then connect to other products to listen to music.

How To Use?
- Press Mode Switch once to switch to headphones to sound. (Speakers is in mute mode)
- Press Mode Switch again to switch to speakers to sound. (Earphones is in mute mode)

Features:
- Large and bright knob. Labor-saving to adjust even with one finger.
- BT-Z2 is 3CM high and 7CM in diameter. It is an upgraded version of BT-830. It uses a fully sealed potentiometer, which optimizes its circuit and improves sound quality.
- Two ports on the side: A headphone jack. And an AUX Audio Input port is convenient to connect to Bluetooth or other devices (this AUX interface needs to be connected to a headphone cable with dual plugs).
- Mode Switch button: Headphones/Speaker Switch. When switch to headphone state, headphones' volume can be controlled and speakers is mute. That is, it can function as a mute button.
- The switch used is a band switch, which feels good and has a large elasticity, and it can be used repeatedly for 500,000 times.
- Controller with two cables. Each cable 1.6M long, total length about 3.2M. Suitable for computer desk with height lower than 1M.

Package Included:
- 1 x Set of Speaker Headphone Switch