CapDMA M2 High Speed DMA Board Direct Memory Access Board PC External Development Board with Pre-flashed Customized Firmware

CapDMA M2 High Speed DMA Board Direct Memory Access Board PC External Development Board with Pre-flashed Customized Firmware

Description:
- Installation help and driver documentation: https://discord.gg/captaindma
- No FW (pre-installed test firmware)
- Fully emulates real device firmware.
- Plugs directly into M.2 slot (for users without PCIE slot)
- Can be used with USB4 External Hard Disk Drive Enclosure, which plugs directly into the USB4/Thunderbolt port of the host computer for more convenient use. (Custom USB4 enclosures are in production and will be released soon)

Artix-7 FPGA - A Speedy Processor:
- The CapDMA 4th Generation PCIe board contains an Artix-7 35T FPGA chip for Xilinx® 7 series that enables smooth and speedy processing.

Customized Firmware:
- To make your experience even more enjoyable, this board comes pre-flashed with either a customized or shared firmware (you choose), eliminating the need to flash the board yourself.

Update Without A Hassle:
- Enjoy effortless updating and avoid the hassle of re-flashing the board thanks to its innovative 2-in-1 USB-C port that handles both data and JTAG.

USB3.2 Gen 2:
- Get lightning-fast data transfer with our USB3.2 technology - up to 200MB/s! Thanks to our cutting-edge FT601 USB3.2 Gen 2 to FIFO interface bridge chip, you can enjoy up to 5Gbps of bandwidth. Upgrade your DMA hardware today!

Note:
- If you use a USB4 enclosure, it only supports the USB4/Thunderbolt port of the host computer, and does not support USB3.0/3.2.

Specification:
- Product size: 22 x 20 x 6.5cm
- Net weight: 350g

Package Includes:
- 1 x DMA Board
- 1 x Firmware v4 (Preflashed)
- 1 x USB-C3.2 Gen 2 to USB-A Cable