| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $1,716.55 | $1,681.52 | $1,628.97 | $1,558.91 | Contact US |
Description:
- 1:1 clone Version VS McIntosh C-22 circuit
- After more than 3 years of research and development, the team has developed the re-engraved circuit, all 1:1 precision soldering, all the solders are made of German imported WBT solder, and the original German Weimar resistors, Japanese ruby Capacitors, Philip capacitors, etc. are used.
- Each capacitor and resistor connecting wire is welded on after a carefully selected paired c-22. As for the proprietary sentinel monitor technology, it replaces the previous Power Gard, which allows continuous analysis of the output current., And turn off the amplifier when it exceeds a certain limit to maintain the service life of the device. The overall distribution of the circuit is reasonable and orderly, and the neat and tidy circuit has good consistency and completeness for the good machine is the guarantee of the product.
- Using 6 12AT7 amplifier tubes, the sound is full and durable, stable gain amplification,This high-end gain tubes, which are 100 times the gain coefficient of ordinary 6N3 6N8
- The use of proprietary Air-Pire technology to improve the heat dispersion tube, thus benefiting from the life of the vacuum tube, the sound is more emotional, the details are rich and contagious
Specification:
- Product name: McIntosh vacuum tube PreampC22 (Available MM MC independent phono amplifier)
- Tube model: 4pcs 12AT7 tubes+2pcs 12AXT
- Input impedance: balanced 44k ohms unbalanced 22k ohms
- Voltage gain: 15DB
- Frequency response: + 0, -0.5 db from 20hz to 20 Khz
- Harmonic distortion: 0.8%
- Signal to noise ratio: 》100dB
- Input sensitivity: balanced 900mV unbalanced 450mV
- Power supply voltage: 220V 110V (voltage can be adjusted manually)
- Net weight: 11KG
- Product use: Fever vacuum tube Preamp, can only be used with a power amplifier
Package List:
- Preamplifier*1
- Remote control*1 (the remote control can only control the volume)
① Left and right channel conversion
②Bass adjustment
③Treble adjustment
④Multiple input switching
⑤Switching power supply
⑥Volume adjustment
①Power input
②Fuse holder
③Balanced signal XLR output (connect to the latter stage)
④Analog signal RCA output (connect to the latter stage)
⑤Balanced signal XLR input (connected to audio source)
⑥Analog signal RCA input (connect to audio source)
⑦The independent phono amplifier of the vinyl machine can input MM and MC
⑨Ground wire vocal player dedicated
Note: The remote control can only adjust the volume
