Regular price
$103.21
Regular price
Sale price
$103.21
Friendly Reminder:
The LPT2000 Series and LPT3000 Series Low-Power Test Analyzers are specifically designed for battery-powered applications. They adopt a passive measurement approach and do not provide power to the external target board through their output terminals. Users must supply an external battery to power the target board when setting up the test environment.
Many low-power devices are powered by batteries, especially coin cell batteries, which are not ideal power sources and have inherent internal resistance. As the battery charge decreases, its internal resistance increases further. In other words, an ideal regulated power supply cannot accurately simulate the changes in internal resistance that occur under actual battery-powered conditions. This can lead to battery voltage decline and voltage sag under high-current loads, affecting the stability of the target circuit board under test.
For example, if the target board has an internal DC-DC converter, as the battery charge decreases, the battery's internal resistance increases and its voltage drops. To maintain a stable output voltage, the DC-DC converter draws more current than it would when the battery is fully charged, thereby accelerating battery depletion.
Failure Case: A low-power product powered by a coin cell battery was initially designed and tested using a regulated 3V power supply. The power consumption test results were satisfactory, and the estimated battery life was 3-5 years. However, after mass production, no issues were observed during the initial period of operation. Nearly one year later, a large number of products began experiencing abnormal and rapid battery depletion.
After analysis, it was found that the batteries had poor performance, with their internal resistance becoming excessively high over time. This resulted in excessive voltage sag and a significant increase in operating current. Consequently, the MCU repeatedly reset due to low voltage and could not enter sleep mode, leading to rapid battery depletion. These issues would not have occurred during testing if a regulated power supply had been used throughout.
Therefore, to obtain realistic power consumption results under actual battery-powered conditions while also evaluating battery characteristics, testing with an actual battery as the power source provides the most representative results.
LPT3000 Series Overview:
The LPT3000 Series Low-Power Analyzer is specially designed for electronics engineers to measure power consumption, evaluate battery characteristics, estimate battery life, and perform other related tests on electronic products. It is particularly well suited for products with standby currents in the micro-amp (µA) range.
The engineers behind this product have nearly 20 years of experience in the design, development, and manufacturing of electronic products, with extensive expertise in fields such as the Internet of Things (IoT), where power consumption requirements are exceptionally stringent. Drawing on years of practical experience and addressing the challenges encountered in real-world applications, we developed this product with the belief that technology should be more human-centered. Our goal is to provide engineers with a product that is affordable, easy to use, and reliable.
LPT3000_MINI Features:
* Compact and Portable Design: Compact, lightweight, and easy to carry, fitting conveniently into a briefcase for on-the-go use.
* Low Power Consumption: Powered and connected directly via a computer's USB port.
* Power Isolation: Features an isolated power supply design that isolates USB power to prevent harmful power loops.
* Advanced Dynamic Self-Correction Algorithm: Enables the analyzer to deliver optimal performance under varying environmental conditions.
* Hardware Sampling Rate: Up to 100Kbps.
* Ultra-Low Closed-Loop Noise Current: As low as 1 µA, providing a clean testing environment for low-power measurements.
* High Current Resolution: Current resolution down to 1µA, enabling precise detection of subtle current variations.
* Low Voltage Drop: Less than 50mV at currents below 500mA.
* Dashboard-Style Software Interface: Presents test data clearly and intuitively, without complicated operations.
* Estimated Battery Life Display: Directly displays estimated battery life, helping you achieve your testing goals with ease.
* Buzzer-Based Current Alarm and Over-current Protection: Provides audible current alerts and over-current protection to help safeguard your DUT during testing.
* Test Data Storage and Retrieval: Save and retrieve test data for convenient access to historical measurements anytime.
* Automatic Test Report Generation: Automatically generates test reports to make testing simpler and more efficient.
LPT3000_MINI Applications:
* Low-Power Testing and Analysis of IoT Devices
* Current Data Logging and Analysis
* Voltage Data Logging and Analysis
* Battery Life Analysis and Estimation
* Battery Voltage Sag Characterization
* Power Consumption Analysis of General Electronic Products
* Abnormal Current Analysis in Electronic Products
* Power Consumption Analysis on Electronics Production Lines
Packing List:
* 1 x LPT3000_MINI Analyzer
* 1 x 4mm Black Test Lead with Alligator Clip
* 1 x 4mm Red Test Lead with Alligator Clip
* 1 x 4mm Blue Test Lead with Alligator Clip
* 1 x USB Data Cable
Packaging Details:
* Package weight: 0.75kg
Note:
* Batteries and other items are not included in the package.


