10PCS DRV8833 High Performance Motor Driver Module for DC Motor and 4-Wire Stepper Motor Driving

Description:
- The DRV8833 motor drive module can directly replace the TB6612 drive module, and the pins are basically fully compatible.

Features:
- Product size: 18 x 21mm
- Input voltage: 2.7 - 10.8V
- Single H-bridge output current: 1.5A, can drive 2 DC reducer motors.
- Built-in overcurrent protection, short circuit protection, undervoltage lockout, and overheat protection. Equipped with low-power sleep mode.
- Purpose: Can drive DC motors below 1.5A and 4-wire stepper motors.

Pin Description:
- ANI1: The logic input control port of AO1, with a voltage level of 0-5V.
- AIN2: The logic input control port of AO2, with a voltage level of 0-5V.
- BNI1: The logic input control port of BO1, with a voltage level of 0-5V.
- BIN2: The logic input control port of BO2, with a voltage level of 0-5V.
- AO1 and AO2 are 1-channel H-bridge output ports, connected to two pins of a DC motor.
- BO1 and BO2 are 2-channel H-bridge output ports, connected to the two pins of another external direct motor.
- GND: Ground.
- VM: Chip and motor power supply pins, with a voltage range of 2.7V - 10.8V.
- STBY: Grounded or suspended chip does not work, no output, connected to 5V for operation; Level of 0-5V.
- NC: Not connected.

Package Included:
- 1 x Motor Driver Module