Maxgeek 12V 20A Switch Power Supply Battery Charger Module for Generator LED Light Industrial Equipment

Maxgeek 12V 20A Switch Power Supply Battery Charger Module for Generator LED Light Industrial Equipment

Specification:
Output:
DC voltage: 12V
Rated current: 20A
Current range: 0~20A
Rated power: 240W
Ripple noise (max.): 120mVp-p
Voltage adjustment range: 10.8~13.2V
Voltage tolerance: ±1%
Line regulation: ±0.5%
load regulation: ±0.5%
Setup,rise, hold time: 800ms, 50ms, 19ms at full load

Input:
Voltage range: 90-132VAC/176-264VAC by switch 248-370VDC
Frequency range: 47~63Hz
Efficiency: 79%
AC current: 4.8A/115VAC, 2.8A/230VAC
Inrush current (max.): cold start, 45A/230VAC
Leakage current: ＜2mA/240VAC

Protection:
Overload, over voltage: 105~135% rated output power, protection type: hiccup mode, recover automatically after fault condition is removed, 13.8~16.2V

Environment:
Working temperature, humidity: -10~60℃, 20~90% RH non-condensing
Storage temperature, humidity: -20~85℃, 10~95% RH
Temperature coefficient: ±0.03%/℃ (0~50℃)
Vibration: 10~500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes

Safety&EMC:
Withstand voltage: I/P-O/P:3KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC
Isolation resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC

Others:
MTBS: 238.9K hrs min, MIL-HDBK-217F (25℃)
Size:215*115*50mm (L*W*H)

Package List:
1 x Switch Power

Note:
1. All parameters (not specially mentioned) are measured at 230VAC input, rated load and 25℃.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminal with a 0.1μf & 47μf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.