MYJG80W 220V 80W-100W CO2 Laser Power Supply (without Display) for CO2 Laser Engraver Cutting Machine

MYJG80W 220V 80W-100W CO2 Laser Power Supply (without Display) for CO2 Laser Engraver Cutting Machine

Specifications:
- Model: MYJG80W
- Output current maximum: 26mA
- Size: 197 x 161 x 91mm/7.8 x 6.3 x 3.6"

Attention:
1. The laser tube must be cooled by water when working!
2. Open circuit is not allowed for the high-voltage output! (The positive and negative terminals of the high-voltage output must be connected to the positive and negative terminals of the laser.)
3. After the power supply fails, there is still residual voltage inside the power supply and on the laser. If it needs to contact the electrode of the laser, first contact the positive electrode with a grounded wire to drain the residual voltage (The high-voltage output must ensure the insulation safety requirements of 50KV high voltage to ground).
4. The power supply must use a three-pin socket with ground terminal. The enclosure must be strictly grounded to avoid electric shock.

Package Included:
- 1 x Laser Power Supply