Crosbon CO-2000 Hifi Audio Power Conditioner Isolated Power Supply 220V Input with 220V 100V Output

Crosbon CO-2000 Hifi Audio Power Conditioner Isolated Power Supply 220V Input with 220V 100V Output

Attention:
* Many audiophiles have specific requirements for cables, so this power supply does not come with external cables!

Description:
Compared with traditional power strips with filters or isolation transformers, the Crosbon power processor adopts a completely different design philosophy. To ensure that the dynamics of audio and AV equipment remain unaffected while preserving the original tonal characteristics of the devices, all CO-2000 series products are built around a core toroidal isolation transformer. Users only need to choose the appropriate model based on the total power consumption of their audio and AV system to enjoy the benefits of clean power, without worrying about any side effects. This unique design not only preserves the original sound quality of the equipment but also effectively enhances the overall audio and video performance, taking your audiovisual experience to a higher level.

We understand that, due to differences in winding methods, the primary and secondary coils of a toroidal isolation transformer each have unique inductance, capacitance, and resistance characteristics. Through precise calculations and extensive experimentation, Crosbon cleverly utilizes the inherent inductance, capacitance, and resistance of the primary and secondary coils—without adding extra inductors or capacitors. By combining this with suitable core materials and winding techniques, they successfully achieve effective filtering.

This innovative design not only ensures that the CO-2000 can handle high current flow but also preserves its advantage of not compressing the dynamic performance of audio and AV equipment.

Features:
* Input Voltage: 220V
* American circuit breaker for Jialing
* Known as the cleaner of sound, this seemingly inconspicuous device is actually an indispensable core component in high-end audio systems.
* The primary and secondary of the Crosbon toroidal isolation transformer are fully isolated, reducing noise from 2kHz down to over 1MHz. Low impedance provides instantaneous power, and high power capacity ensures low mechanical noise.
* It eliminates surges and provides comprehensive protection against surges and lightning strikes up to 6000V/3000A. The series-mode technology does not pollute the ground.
* Medical-grade dual-use socket
* Dual Voltage Output: 220V and 100V
* The American switch system (for Jialing) uses a reliable 15A-rated relay.
* Toroidal Isolation Transformer Technology: Narrow Bandwidth (NBT), Low Noise (LONO), Low Inrush (IMIN), Low Stray Field (LoSTrax), Triple Ground Shielding (UST), and oversized vibration-damped transformer installation.
* An independent high-reliability power module further isolates low- and high-voltage paths, with power supply shielding and grounding.
* Typical household wiring or ordinary socket supply shows measured noise of 172mVDC.
* The CO-2000 delivers completely pure isolated power, with noise fully eliminated (1mVDC within the error range of the testing equipment). 
* The Crosbon CO-2000 isolated power supply protects connected devices through its innovative series-mode suppression, which also helps maintain clean power. Most surge-suppression circuits operate in a shunt mode.
* The Crosbon toroidal isolation transformer delivers 2000W of power, providing connected devices with extremely low source impedance. A low-impedance power supply can instantly deliver high current, ensuring that components are never "starved" of power.
* Crosbon's design carefully balances the inherent inductance, capacitance, and resistance of the toroidal transformer, allowing it to act as a highly effective low-pass filter.
* The noise attenuation corner frequency is 2kHz, with an attenuation rate of 12dB per decade up to 500kHz. Another major advantage of NBT technology is the elimination of external filters, such as capacitors and other components that may fail over time. The toroidal transformer effectively attenuates both differential-mode (LN) and common-mode (GN) noise.
* The power supply uses newly imported 0.23mm laminations for Nippon Steel, achieving a magnetic flux of over 19,000 gauss, with extremely low core loss, making it a top-quality core. The primary and secondary windings are made with 4N oxygen-free copper, and a high-purity copper foil shield is added between them. This ensures exceptional anti-interference and noise-isolation performance. The characteristics of the balanced isolation transformer are well-known among audiophiles: smooth and thick mid-to-high frequencies, with an extremely quiet background. It is the ideal transformer for HiFi systems.

Specifications:
* Model: CO-2000
* Product Name: Hifi Audio Power Processor
* Input Voltage: 220V
* Dual Voltage Output: 220V and 100V
* Rated Power: 2000W (full shared power)
* Peak Power: 4000W (maximum power)
* Main Unit Dimensions: 435mm (W) × 340mm (D) × 150mm (H)
* Main Unit Weight: 27KG

Packing List:
* 1 × Isolated Power Supply

Packaging Details:
* Weight: 35kg