EV2400PandaX Economic Version HPA500 China-Made EVM Interface Board Bqstudio Debugger for Drone Battery Maintenance

Version Introduction:
- For temporary use, you can choose the Panda Economy Edition, which has reduced functions (not suitable for research and development or professional maintenance). It has the same original imported controller as the Pro full version and is stable, cost-effective, and suitable for those with less budget.
- The original main control, high cost-effectiveness, and stable operation of the cache chip.

Features:
- Dual over-current protection
- Double over-temperature protection
- 6-way isolation
- 11-way anti-static
- 4 types of communication
- Power supply anti-backfilling
- USB powered
- Built-in pull-up resistor
- IO withstand voltage 100V
- It has 4 ports and supports 4 protocols

Functional Specifications:
- Input interface: Type-C
- Output interface: KF2510*4
- MCU: MSP430F5529
- PORT 1 (SMB): support
- PORT 2 (I2C): support
- PORT 3 (HDQ): support
- PORT 4 (SW): support
- Three status indicator: support
- CPU independent power supply: support
- Output independent power supply: 1-channel
- PORT 5 (SPI): no
- PORT 5 (UART): no
- IO port pull-up switch: support
- VOUT switch: support
- VOUT driving relay: support
- Live reset function: no
- Autocycle function: support
- Autocycle voltage regulation: no
- IO port isolation: multi-chip
- Soft boot: no
- IO port dynamic pull-up voltage regulation: no
- IO port level conversion: no
- VOUT voltage regulation: no
- High power 5V: no
- High power 5V voltage stabilization: no
- ROHS: no
- PORT 5 (SBW): no
- PORT 6 (BSL): no
- CPU power supply ability: 150mA
- Maximum pulling current: 200uA
- Isolation bandwidth: 1MHz
- IO port over-voltage strategy: 100V withstand voltage

Protection:
- Output anti-backfilling: support
- Over-current protection: chip
- IO port anti-negative voltage: support
- IO port current limiting: support
- VOUT current limit: support
- VOUT over-temperature protection: 1-channel
- Power supply over-temperature protection: support
- USB anti-backfilling: support
- Output clamp protection: support
- VOUT independent current limit: no
- Static over-current protection: no
- Surge protection: no
- Multi-voltage specification: no
- Golden PCB: yes
- Impact current protection: no
- Crossing protection: no
- HBM isolated ESD: no
- High power 5V over-current protection: no
- High power 5V over-temperature protection: no
- CDM isolated ESD: no
- MM isolated ESD: no
- Quantity of electrostatic protection: 11-channel

Note:
- Output independent power supply: It allows different ports to connect different system chips, so that there is no series connection.
- Maximum source current: It allows more devices to be hung on the communication bus.
- Isolated bandwidth: It improves communication accuracy, which is conducive to reducing communication interference and bit errors.
- IO port over-voltage strategy: burn your devices or other devices if wrong wire is connected.

Package Included:
- 1 x EV2400PandaX

Attention:
- Battery is not included in the package.
- It can solve most battery software problems, but it cannot solve battery hardware failures.
- During normal debugging, only VSS, SDA and SCL cables need to be connected, and Vout is disconnected. Vout is a function pin, not a power pin. Please not connect Vout when connecting the battery. When debugging the battery, do not turn on the battery to prevent short circuits.
- Connected to a computer for the first time, the EV2400PandaX will automatically detect and activate for about 1 second, without user operation. After activation, install and open the bqstudio software to recognize the device and firmware version.