HamGeek Lightweight Portable High Strength 3D-Printing Positive V Mount Base for M10 Telescopic Antenna

Introduction:
- Using 3D printing technology, a lightweight telescopic positive V base is launched for users who require portability, and the price is also more friendly to players. It can be connected to a photographic light stand or a 1/4-inch thread, and the feeder is separated by a copper nose pressed on the root of the tie rod, allowing the feeder to bypass the magnetic ring.

Specifications:
- Adaptation: M10 telescopic antennas
- Material: high strength PETG
- Net weight: 33g + 9g
- Fixing: M8 thread + light stand + 1/4 thread

Package Included:
- 1 x Antenna Mount Base

Reminders:
- Actual adjustment: Due to the influence of environment, installation height, and grounding quality, the actual length of the oscillator may need to be fine tuned (±5%). It is recommended to use an antenna analyzer (such as NanoVNA) or SWR meter to optimize the standing wave ratio (SWR) at the target frequency.
- About strength: High strength PETG is used, which exceeds the toughness and weather resistance of traditional PLA material. It is embedded with brass hot melt nuts, and can easily lift a 19 kilogram water bucket during testing. The threads are not loose, and the material is not broken. If M8 thread fixing method is not needed, thread adhesive can be inserted between the lamp bracket interface and the main body.

Note:
- The telescopic antenna is not included.