MINI DS211 ARM Nano Pocket Professional Portable Digital Oscilloscope Digital DSO 211 DS 211 DS0211 DS0 211 with MCX Probe
Dostupnost vyzvednutí nebylo možné načíst
MINI DS211 ARM Nano Pocket Professional Portable Digital Oscilloscope Digital DSO 211 DS 211 DS0211 DS0 211 with MCX Probe
Description:
- DS211 is the update version of DS201.
- It is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements.
DSO mini oscilloscope.
- Rising/falling edge trigger.
- Compact rectangular housing.
- Large display screen.
- Buttons on the side.
- Mini pocket sized.
- Compact and lightweight.
- Store file as BMP, DAT, BUF, or CSV format.
- Use build-in flash disk to save/read waveform image.
- Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp.
- Output test signal: 10Hz-1MHz (1-2-5 sequence step).
- Synchronous mode: auto, normal, single, none, scan.
- Auto measurement: frequency/duty cycle, DC RMS voltage/Vpp /Vmax/Vmin.
Specification :
| Parameters of Mini DSO DS211 | |
| Model | DS211 |
| MCU | STM32F103VC |
| ADC | MCU internal ADC |
| Channels | 1 Analog channel+1 Operation channel |
| Analog Bandwidth | 200KHz |
| Max Sample Rate | 1MSa/s |
| Max Sample Memory Depth | 8K |
| Horizontal sensitivity | 1uS/Div~2S/Div(1-2-5sequence step) |
| Vertical Sensitivity | 20mv/Div~10V/Div(1-2-5sequence step) |
| Analog Input Impedance | >500kΩ |
| Coupling | DC/AC |
| Synchronous Mode | Ascend/Descend Edge Trigger Mode |
| AUTO_FIT | AUTO_FIT |
| Math Waveforms | -A, RecA, A+ RecA |
| Inbuilt Signal Generator | Sine/Square/Triangle/Sawtooth wave |
| Synchronous Mode | Auto, Normal, Single, Scan |
| Auto Measurement | Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average |
| Storage | 8MB USB flash disk memory |
| APP installed | 1 |
| Operation | Button |
| USB port | MicroUSB |
| Battery | 500mAh |
| Screen Size | 2.8‘’ |
| Screen Resolution | 320 x 240 |
| Dimension | 106.5mm x 55.7mm x 11.5mm |
| Weight(with Battery): | 65g |
| Open Source | Application layer Open-Source |
| Certifications | CE/FCC |
Application:
- Outdoor Maintenance(AC/DC Power and Inverters, floor fire equippment and circuit-control).
- Hardware maintenance and software debugging RS232/RS485/I2C/CAN and so
on circuit, LED display and scanning driver circuit via keyboard
- Audio device and circuit, elecrtic toys and remote models, car circuit maintenance.
- School tutoring and DIY electronic-development.
- Somewhere needs to observe the slow signal changes (eg. Relay module
and inch-switch, battery charge and discharge curve, temperature sensor
measure and so on.)
- Power for related circuit.
1 x DS0211 Digital Oscilloscope
1 x MCX Probe
1 x USB Cable
1 x User manual