iCopy-X HID Decoder High Speed Access Control Reader RFID Card Copier for Proxmark3 Writing

iCopy-X HID Decoder High Speed Access Control Reader RFID Card Copier for Proxmark3 Writing

Description:
- The Decoder is an iCopy-X accessory that allows for the rapid decoding and cloning of iCLASS SE® / SEOS® Decoder.
- Until now, cloning of iCLASS SE® and iCLASS SEOS® has been impossible. With the iCS Decoder and iCopy-X - it's as easy as cloning any standard RFID tag.
- Most iCLASS® SE® & SEOS® systems still have legacy card acceptance enabled in their configuration. The iCS Decoder can decode iCLASS SEOS® IP / SE cards, and then generate an new card with legacy encoding.
- For pentesters, the iCS Decoder exposes an entirely new in-scope attack surface. Likewise, LEA can use the device to make rapid clones in the field of a previously impossible badge type.

Please note:
- The iCS Decoder will only work for target systems that are configured to accept legacy cards. This is the default configuration.
- This technique will not work on all iCLASS SE® readers. Coverage is approximate 85%.
- The iCS Decoder is an accessory - it requires an iCopy-X.

How to use it?
1) Attach iCS Decoder to iCopy-XS via the Type-C to Type-C Cable provided.
2) Swipe the card on the iCS Decoder.
3) On the iCopy-XS, the screen will display the CSN, Facility Code, and Card Number.
4) Disconnect the iCS Decoder from the iCopy-XS.
5) At this stage, the card is successfully read. iCopy-XS will prompt you to place a new iCS cloning card on the iCopy-XS antenna portion and proceed with the cloning process.

Note:
- If the iCS Decoder doesn't respond, please reconnect.
- Please wait for iCopy-XS to respond to the iCS Decoder. Normally it would take 1-5 seconds for it to prompt the screen.

Package Included:
- 1 x Decoder