Description:
This " GEPRC Mark4 HD5 " 224mm frame was specially designed for the DJI Digital FPV system.
Full carbon fiber airframe, suited for a 5-inch propeller power system and flight controllers.
With 3D printed base holder, helps to protect the DJI FPV Air Unit and antenna in the event of a crash, also with separate parts for maintenance and replacement.
With 30.5*30.5mm and 20*20mm flight control holes , stack can fit in the center or the rear.
Lower center gravity design, the wind resistance is smaller, reduce air resistance, easy to maintain.
YFS screws, 12.9 hardness, hard and non-slip.
No propeller and motor in the lens view or video recording! which will be the perfect FPV experience!
Specification:
Type: Quadcopter freestyle frame
Brand name:GEPRC
Item name:MARK4 HD5
Frame type: H type
Frame wheelbase: 224mm
Weight: about 121g (including 3D printed parts)
Size:138x176mm
Mounting Holes: 30.5x30.5mm/20x20mm
Arms thickness : 5mm
Side plate thickness: 2.5mm
Top plate thickness: 2.5mm
Bottom plate thickness: 2.5mm
Protect plate thickness: 2mm
Fixed part:
8 x M3*25mm Aluminum column silver gray
4 x M3*18mm Aluminum column silver gray
8 x M3*8 YFS Flat Screw
4 x M3*10 YFS Flat Screw
2 x M3*10 YFS Button Screw
2 x M3*12 YFS Button Screw
4 x M3*14 YFS Button Screw
4 x M3*20 YFS Button Screw
4 x M3 Nylon nut
4 x Red silicone shock absorber
2 x 20*220 LiPo fixed strap
2 x 15*250 LiPo fixed strap
5 x Nylon cable tie
4 x Shock-absorbing EVA pad
Recommend parts (not include):
Flight Controller: RF/Kiss/F3/F4/F7
Motor: 2205/2206/2207/2207.5/2305/2306/2306.5
ESC: 30A-50A
Propeller: 5inch
LiPo: 4S 1500mAh ~ 6S 1300mAh
FPV: DJI FPV Air Unit
Tips:
DO NOT touch the air unit before it cools down.
DO NOT use the air unit for an extended period when there is no external cooling equipment. Otherwise, the air unit may overheat and enter overheat protection mode.
Package included:(unassemble)
4 x 5mm 5inch arms plate
2 x 2.5mm side plate
1 x 2.5mm top plate
1 x 2.5mm bottom plate
2 x 2mm bumpers plate
2 x 2mm reinforce plate
1 x LiPo silicone pad
1 x DJI FPV Air Unit mount adapter
1 x Antenna mount adapter
1 x RX antenna mount adapter
Description:
- This " GEPRC Mark4 HD5 " 224mm frame was specially designed for the DJI Digital FPV system.
- Full carbon fiber airframe, suited for a 5-inch propeller power system and flight controllers.
- With 3D printed base holder, helps to protect the DJI FPV Air Unit and antenna in the event of a crash, also with separate parts for maintenance and replacement.
- With 30.5*30.5mm and 20*20mm flight control holes , stack can fit in the center or the rear.
- Lower center gravity design, the wind resistance is smaller, reduce air resistance, easy to maintain.
- YFS screws, 12.9 hardness, hard and non-slip.
- No propeller and motor in the lens view or video recording! which will be the perfect FPV experience!
Specification:
- Type: Quadcopter freestyle frame
- Brand name:GEPRC
- Item name:MARK4 HD5
- Frame type: H type
- Frame wheelbase: 224mm
- Weight: about 121g (including 3D printed parts)
- Size:138x176mm
- Mounting Holes: 30.5x30.5mm/20x20mm
- Arms thickness : 5mm
- Side plate thickness: 2.5mm
- Top plate thickness: 2.5mm
- Bottom plate thickness: 2.5mm
- Protect plate thickness: 2mm
Fixed part:
8 x M3*25mm Aluminum column silver gray
4 x M3*18mm Aluminum column silver gray
8 x M3*8 YFS Flat Screw
4 x M3*10 YFS Flat Screw
2 x M3*10 YFS Button Screw
2 x M3*12 YFS Button Screw
4 x M3*14 YFS Button Screw
4 x M3*20 YFS Button Screw
4 x M3 Nylon nut
4 x Red silicone shock absorber
2 x 20*220 LiPo fixed strap
2 x 15*250 LiPo fixed strap
5 x Nylon cable tie
4 x Shock-absorbing EVA pad
Recommend parts (not include):
Flight Controller: RF/Kiss/F3/F4/F7
Motor: 2205/2206/2207/2207.5/2305/2306/2306.5
ESC: 30A-50A
Propeller: 5inch
LiPo: 4S 1500mAh ~ 6S 1300mAh
FPV: DJI FPV Air Unit
Tips:
DO NOT touch the air unit before it cools down.
DO NOT use the air unit for an extended period when there is no external cooling equipment. Otherwise, the air unit may overheat and enter overheat protection mode.
Package included:(unassemble)
4 x 5mm 5inch arms plate
2 x 2.5mm side plate
1 x 2.5mm top plate
1 x 2.5mm bottom plate
2 x 2mm bumpers plate
2 x 2mm reinforce plate
1 x LiPo silicone pad
1 x DJI FPV Air Unit mount adapter
1 x Antenna mount adapter
1 x RX antenna mount adapter