HamGeek HM X310 Kintex-7 FPGA High-End SDR Platform DC–6GHz 160MHz PCIe 10G Ethernet for Wireless & Radar

Features:
* The HamGeek HM X310 is a software-defined radio (SDR) platform based on Kintex-7 FPGA. It is suitable for next-generation wireless communication applications and can also be widely used in electronic warfare, radar, navigation, and other radio-related fields.
* Software-configurable to support various new radio standards and protocols.
* Built-in two microwave RF expansion slots, compatible with different microwave RF daughterboards, covering DC~6GHz carrier frequency and 160MHz signal bandwidth.
* Equipped with rich high-speed interfaces including PCIe, dual 10 GigE, and dual 1 GigE.

Technical Specifications:
1. Baseband
* ADC Sampling Rate: 200 MS/s
* ADC Resolution: 14 bits
* DAC Sampling Rate: 800 MS/s
* DAC Resolution: 16 bits
* External Host Sampling Rate (16-bit data width): 200 MS/s
* Internal Reference Clock Accuracy: 2.5 ppm
* Optional GPSDO Accuracy: 20 ppb

2. Microwave RF – Receive
* Noise Figure:
  * 10–20 MHz: 3–4 dB
  * 20–500 MHz: 2–3 dB
  * 0.5–1.5 GHz: 2–4 dB
  * 1.5–4 GHz: 4–5 dB
  * 4–6 GHz: 5–7 dB
* Third-Order Intercept Point (Receive):
  * 10–35 MHz: 4–10 dBm
  * 35–500 MHz: 10–12 dBm
  * 0.5–1.5 GHz: 8–13 dBm
  * 1.5–6 GHz: 8–9 dBm
* IQ Imbalance (Receive): < -30 dBc

3. Microwave RF – Transmit
* Output Power:
  * 10 MHz–3.5 GHz: >20 dBm
  * 3.5–4 GHz: 18–20 dBm
  * 4–5 GHz: 13–18 dBm
  * 5–6 GHz: 7–13 dBm
* Third-Order Intercept Point (Transmit):
  * 10–500 MHz: >40 dBm
  * 0.5–3 GHz: >36 dBm
  * 3–5 GHz: >20 dBm
  * 5–6 GHz: >26 dBm
* IQ Imbalance (Transmit): < -30 dBc

4. Development & Application
* Operating Systems: For Linux, Windows
* Software Development Environment: GNU Radio, MATLAB, LabVIEW
* Open-Source Projects: OpenAirInterface, OpenLTE

5. Environmental & Mechanical
* Power Supply: DC 12.5 ± 3.5V
* Full Power Current: ≤7.5A at 12V
* Dimensions (WxDxH): 277 mm x 217 mm x 39 mm (1U Half-Width)
* Weight: 1.7 ± 0.1 kg

Packing List:
* 1 x HamGeek SDR Platform

Packaging Details:
* Package weight: 5.5kg


1. Front Panel (Introduced from left to right):
* JTAG: USB connector for on-board USB-JTAG programmer.
* RF Group A:
  * TX/RX LED: Indicates data transmission on TX/RX channels of daughterboard A.
  * RX2 LED: Indicates data transmission on RX2 channel of daughterboard A.
* REF: LED indicating external reference clock is locked.
* PPS: LED indicating valid Pulse Per Second (PPS) signal.
* AUX I/O: 15-pin auxiliary GPIO connector on front panel.
* GPS: LED indicating GPS reference is locked.
* LINK: LED indicating communication between host and device.
* RF Group B:
  * TX/RX LED: Indicates data transmission on TX/RX channels of daughterboard B.
  * RX2 LED: Indicates data transmission on RX2 channel of daughterboard B.
* PWR: Power switch.


2. Rear Panel:
* PWR: Power connector.
* 1G/10G ETH: SFP+ ports for Ethernet interfaces.
* REF OUT: Reference clock output port.
* REF IN: Reference clock input port.
* PCIe x4: Connector for wired PCI Express link.
* PPS/TRIG OUT: Output port for PPS signal.
* PPS/TRIG IN: Input port for PPS signal.
* GPS ANT: Connector for GPS antenna.