| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $105.69 | $103.54 | $100.30 | $95.99 | Contact US |
Double-layer 42 Stepper Motor Intelligent Robot Car Chassis 4WD Chassis with 80mm Mecanum Wheels
$90.07
Single-layer 42 Stepper Motor Intelligent Robot Car Chassis 4WD Chassis with 80mm Mecanum Wheels
$85.18
Double-layer 42 Stepper Motor Intelligent Robot Car Chassis 4WD Chassis with 60mm Mecanum Wheels
$85.73
Double-layer Acrylic 4WD Chassis 305 Series 12V 320RPM Encoder Motor Intelligent Car Chassis with Mecanum Wheels
Description:
- Providing a PID debugging upper computer that enables graphical debugging of PID parameters, making PID tuning more intuitive and convenient. This upper computer supports independent adjustment of PID parameters for 4 motors, with one click reading/writing of PID parameters, greatly simplifying PID debugging time and making debugging more intuitive and convenient.
520 Encoder Motor:
- The encoder is designed with a built-in filtering circuit, which effectively improves the anti-interference ability of the encoder to motor current, and the waveform output is more stable.
- Pure copper wire winding: the rotor part is made of pure copper, with low resistance and strong conductivity, and the motor torque is increased.
- All metal gear: made of all metal gear material, it is more wear-resistant and extends its service life.
- D-shaped output shaft: more convenient to install, less prone to slipping, and saves installation time.
Encoder Parameter:
- Encoder line count: 11 (11 square waves per circle of the motor), the number of square waves corresponding to one revolution of the motor output shaft requires *reduction ratio.
- Power supply voltage: 3.3V/5V
- Output signal: square wave (AB phase)
- Terminal mode: XH254
Specification:
- Finished product size: 307 x 305 x 126mm
- Net weight: about 1805g
Package Included:
- 2 x Acrylic Base Plate (305x230x5mm)
- 4 x 520 DC Encoder Motors
- 4 x Motor Brackets
- 4 x 80mm Mecanum Wheels
- 4 x Tire Couplings
- 2 x Cable Ties
- 1 x Screw and Copper Pillar Pack
- 1 x Pin Cable Pack
Note:
- Please contact us to get the development resources after receiving the product.
- It is unassembled and you need to assemble it by yourself.
- Please confirm if the product meets your requirements before assembling. As assembled products cannot be resold, returns are not accepted.
