6-Channel MOSFET Module Microcontroller PLC Amplification Field Effect Drive Tube Optocoupler Isolation PWM Control (3.3V)

Interface Description:
- VCC: Connect to the positive pole of DC5v (3.3v) power supply
- GND: Connect the negative terminal of the DC5v (3.3v) power supply, which needs to be grounded together with the signal terminal
- IN1-IN6: Connect to the IO port of a microcontroller or PLC
- H/L jumper: H is high level, L is low level, and the middle is the common terminal
- VIN: Load side power supply DC positive level
- GND: Load side power supply DC negative pole
- Connect the load terminals OUT1-OUT6 to the positive pole of the load device
- Connect the load terminal GND to the negative terminal of the load device
 
Parameter Description:
- Indicator light: The 5V version comes with an indicator light, which lights up when there is a signal; 3.3V version without indicator light.
- Application scenario: The output end can control high-power DC devices such as motors, light bulbs, LED light strips, DC motors, micro water pump solenoid valves, etc; PWM can be input to control motor speed, light brightness, etc.
- The voltage range of the control terminal is DC5V-DC48V. As the control board has not undergone high-power heat dissipation treatment, it is recommended that the single power should not exceed 60W.
- The control end and signal end are isolated by optocouplers, please feel free to use.

Package Included:
- 1 x MOS Tube Module