NPort 5130 Compact Serial Device Server 1-Port RS422/RS485 Server Built-in 1.5KV Magnetic Isolation Protection for MOXA

Introduction:
- NPort device servers make your serial devices network-ready in an instant. Their compact size makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.
- Easy to install: Perhaps the NPort 5130 you are using is distributed in different locations on the network, but they have the same configuration. To avoid duplicate installations, Moxa provides a convenient tool for batch installation in NPort Administrator for Windows. Users can configure all parameters except for IP by selecting all online NPorts.
- Troubleshooting is easier: NPort 5130 supports SNMP V2.0. By using SNMP Manager, users can observe the status of all NPort 5130 on the network. When NPort5130 encounters an error (user-defined), it will automatically notify SNMP Manager. In addition, the device also provides email alert functionality for users who are unwilling to use SNMP manager. Through Moxa's Windows Utility or web console, users can customize alarm triggering conditions. The alarms received by users include information such as hot start, cold start, or password change for NPort 5130.

Features:
- Low cost, credit card size.
- Support for Windows/Linux COM serial port driver mode.
- Provide different socket operation modes including TCP Server, TCP Client, UDP Server/Client, and Ethernet modem.
- Peer to peer connection mode that does not require a PC and can connect two serial devices through a network.
- Easy to use and batch installable Windows tools.
- All signals are equipped with built-in 15 KV surge protection.
- Support network management protocol SNMP MIB-II.
- Can be configured through web/Telnet.

LAN:
- Ethernet: 1 x 10/100 Mbps, RJ45, Auto MDI/MDIX
- Protection: built-in 1.5KV electromagnetic isolation

Serial Port:
- Interface: RS-232/422/485 (software selection)
- Number of serial ports: 1
- Port type: Male DB9
- Signal:
  RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
  RS-422: Tx +, Tx -, Rx +, Rx-, GND
  RS-485 (2-Wire): Data +, Data -, GND
  RS-485 (4-Wire): Rx +, Tx -, Rx +, GND
  Signal protection: 15KV ESD full signal protection

Serial Port Communication Parameters:
- Checkpoints: None, Even, Odd, Space, Mark
- Data bits: 5, 6, 7, 8
- Stop position: 1, 1.5, 2
- Traffic control: RTS/CTS, XON/XOFF
- Baud rate: 110 bps ~ 230.4 Kbps
- Console port: RS-232 console

Software Features:
- Protocol: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP
- Tool: NPort Administration Suite for Windows 95/98/ME/NT/2000/XP/2003
- Driver support: Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64 COM driver, Linux real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare2.1.x, SVR4.2
- Configuration method: Web/Serial/Telnet console, or Windows utility

Power Supply Requirements:
- Power input: 12 to 48 VDC
- Power consumption: 128.7mA at 12V, 72mA at 24V
- Power protection: 1KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5

Mechanical Specifications:
- Material: Aluminum (1mm)

Working Environments:
- Operating temperature and humidity: 0 ~ 55℃, 5 ~ 95%RH
- Storage temperature and humidity: -20 ~ 85℃, 5 ~ 95%RH

Safety Certification:
- CE: EN55022 Class A/EN55024
- FCC: FCC Part 15 Subpart B, Class A
- UL: UL60950-1, UL 508
- TÜV: EN60950-1
- UL/cUL: Class 1, Division 2, Group A, B, C, and D
- ATEX: Class 1, Zone 2
- Impact: IEC60068-2-27
- Falling: IEC60068-2-23
- Vibration: IEC60068-2-6

Package Included:
- 1 x Serial Device Server