Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $117.50 | $115.10 | $111.51 | $106.71 | Contact US |
Friendly Arm 1GB N-Flash Mini2440 Development Board Arm9 S3C2440 3.5" LCD+Camera+Wi-Fi
Introduction:
- The MINI2440 is an effecient ARM9 development board with a comprehensive price, it characterizes simple method and high performance-price ratio. Based on the Samsung S3C2440 microprocessor, it embodies professional stable CPU core power source chip and reset chip to ensure the stability of the system operation. The PCB on the MINI2440 board is designed to be 4-layers board, adopting the ENIG technology and professional equal-length wiring to ensure the completeness of the signals of the key signal wires; and manufactured and released under stringent quality control plans. With the help of this detailed manual, users are supposed to become proficient in the development process of embedded Linux and WinCE operating system, they are supposed to get the foundation, so long as they have obtained the basic and necessary knowledge about the C language, in two weeks.
(Item) |
Specification |
CPU |
Samsung S3C2440(ARM920T core with MMC, Up to 532MHz) |
SDRAM |
64Mbyte |
Flash |
1G byte Nand Flash + 2M Nor Flash(BIOS installed) |
(LCD Support) |
STN LCD Displays: |
USB Port |
1 USB host and 1 USB device |
Audio |
Audio Input/Output |
LAN |
1 10M Ethernet interface (RJ-45 interface) |
SD/MMC |
SD card interface and holder |
Camera |
All CEMERA signal pin out (Optional Camera avail.) |
UART |
1 RS232 serial port, 3 serial ports available through 14pin (2.0mm space) interface |
Jtag |
standard JTAG interface) |
Buttons |
6 Test buttons |
LEDs |
4 Status LEDs |
I2C bus |
AT24C08 |
AD input |
AD input test |
PWM |
PWM controlling speaker |
RTC |
RTC (battery backed) |
Expansion |
●34pin GPIO expansion connector |
Power Supply |
+5V |
Dimensions |
100x100 mm |
Linux 2.6.13 Features:
Item |
Function and Characteristic |
BIOS (Provide source code) |
boot |
Xmodem |
|
Update Flash |
|
Set Kernel Parameter |
|
Set Partation |
|
BIOS( Do not provide source code) |
boot |
Xmodem |
|
USB |
|
yaffs |
|
eboot |
|
Update Flash |
|
Set Kernel Parameter |
|
Set Partation |
|
File system |
Linux kernel 2.6.13 |
YAFFS |
|
ROM/CRAMFS/EXT2/FAT32/NFS |
|
MACH_TYPE |
|
Driver support |
System Interrupt & Timer Driver |
Serial device driver |
|
Block memory device driver |
|
Flash memory device driver |
|
10Base-T external Ethernet device driver |
|
RTC (Real Time Clock) Driver |
|
USB Host driver |
|
LEDS |
|
Buttons |
|
Many Country Language Support |
|
LCD/Frame Buffer(support 1024*768,800*600,800*480, 640*480,240*320,320*240TFT) |
|
Touch screen driver |
|
MMC/SD card driver |
|
UDA1341 |
|
Network protocol and application |
TCP/IP |
Telnet Server |
|
File transfer (FTP client / server) |
|
Remote login (telnet) |
|
ping, arping |
|
boa |
|
System update and Software download |
FTP download |
Serial port downloard |
|
USB Download and update |
|
NFS |
|
System Config and Serves |
Local console through RS232 and remote telnet configuration and management(Sample Only) |
Ifconfig, route, inetd |
|
login, sh, echo |
|
Linux Basic tools |
cat, chmod, discard, echo, flashfsd, flashwrite, free, genhtml, hostname, init, kill, loader, ls, mkdir, mount, ps, reboot, rm, smanaged, sysconf, yes,insmod, lsmod, rmmod |
Embedded Graphical Interface |
QT/EMBEDED |
Driver for external USB device |
USB Disk |
Removable harddisk |
|
USB Hub |
|
USB Mouse and Keyboard |
|
USB Camera |
Window CE
|
BIOs |
sbc_vivi |
Add USB downloading function in vivi, supporting downloading/ updating image with USB |
Eboot |
Ethernet bootloader for wince |
||
Driver |
Serial device |
Serial port 0 |
|
Flash memory |
Nand Flash driver |
||
10M Ethernet |
CS8900 |
||
USB Host |
Support USB keyboard and USB mouse |
||
USB device |
|
||
RTC |
|
||
EINT |
|
||
LCD |
Support 240x320, 640x480 |
||
Audio |
|
||
SD/MMC card |
|