• FrSky 8 Channel 2.4Ghz TX/RX V8FT+V8FR Upgrade FUTABA DFT+V8FR-II-HV Dual Way
  • FrSky 8 Channel 2.4Ghz TX/RX V8FT+V8FR Upgrade FUTABA DFT+V8FR-II-HV Dual Way
  • FrSky 8 Channel 2.4Ghz TX/RX V8FT+V8FR Upgrade FUTABA DFT+V8FR-II-HV Dual Way
  • FrSky 8 Channel 2.4Ghz TX/RX V8FT+V8FR Upgrade FUTABA DFT+V8FR-II-HV Dual Way

FrSky 8 Channel 2.4Ghz TX/RX V8FT+V8FR Upgrade FUTABA DFT+V8FR-II-HV Dual Way

Availability: Out Of Stock

  • Price:$74.57
  • Price in reward points: 746 Reward Points: 7
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $73.08 $71.59 $69.35 $66.37 Contact US
Quantity:

FrSky 8 Channel 2.4Ghz TX/RX V8FT+V8FR Upgrade FUTABA DFT+V8FR-II-HV Dual Way
Description:

- The FrSKY 2.4 Gig radio module system is a high quality conversion kit that fits most Futaba & Hitec radios with removable frequency modules fitted to the Transmitter. This latest 2.4G technology is a full frequency hopping system (FHSS) similar to the Futaba FAAST technology.

- ACCST: (Advanced Continuous Channel Shifting Technology) is our advanced technology. The ACCST 2.4GHz system shifts the frequency hundreds of times per second. This means signal conflicts and interruptions are largely eliminated

- FAILSAFE: The FrSKY system also has a failsafe setup built in which can be easily activated inside the receiver with the push of a button. The failsafe will set all controls to their neutral position and cut the throttle as soon as it senses a signal loss, reconnection was almost instant during our tests of the system. You can also hold the sticks in the position you would like the failsafe to return to and then set failsafe on, the Rx will remember the stick positions and will continue to remember until you rebind the Rx.

- DUAL Rx ANTENNAS: The front-end of the receiver does switch antenna, when one suffers a loss of signal the ES02 chip switches over to the other antenna. If for some reason neither antenna have a signal (for example the transmitter is switched off), then the receiver rapidly switches between the two until one picks up a signal. It does this around 30 times per second. Coupled with the really fast re-link time, this antenna diversity means that the overall transmitter-receiver link should be as solid as the very best of the big (and expensive) name brand products.

Features:
- ACCST technology(Advanced Continuous Channel Shifting Technology) provides high interference rejection even in an interference rich environment
- Universal transmitter and receiver for all 4ch-8ch controllers
- Quick and precise channels
- Error-free Digital link
- Easy to use range checking system built in
- Low power consumption
- Supports multiple controls by a single controller
- Extended operating range (1.2km)
- The transmitter module accepts either polarity of PPM and at either logic or battery voltage. This means you can wire it up to almost any PPM set.

Compatible with follwing:
- Futaba: 3PK, 3PM, 7U, 8U, 8J, 9C,10C, 9Z and FN series
- Hitec: Optic 6, Eclipse 7.
- WFLY: WFT09, WFT 08.

Transmitter Specfication:
- Operating Voltage Range: 6.0V-13.0V
- Operating Current: 50mA
- Output Power: 60mW
- Resolution: 10bit
- Dimensions: 58.5x37.5x22mm

Receiver specfication:
- voltage:4.8V - 6V
- Operating current:30mA
- receive range:1.2km
- resolution:10bit
- Latency:22ms
- channel no:8 channel
- size:50*24.5*15.3 mm

Package contents:
- 1× transmitter module (Model: V8FT)
- 1× receiver module (Model: V8FR)

 

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha