GPERC GEP-GS RAD 5.8G 2.5W VTX High Power FPV Drone VTX Video Transmitter Module for Long Distance Transmission

GPERC GEP-GS RAD 5.8G 2.5W VTX High Power FPV Drone VTX Video Transmitter Module for Long Distance Transmission

Description:
- RAD VTX 5.8G 2.5W high-power VTX, with six adjustable power levels and a maximum power of 2500mW, stable transmission signal and strong penetration ability. Adopting a double-layer PCB design, separating the power supply from the main control, it has strong anti-interference ability and heat dissipation ability. Comes with three regional frequency groups that can be switched at any time for you to choose from. IRC Tramp protocol, OSD fast tuning. Built-in microphone, real-time feedback of aircraft sound. 7-36V wide voltage input, direct 2-8s battery input. Equipped with temperature control protection function to prevent overheating and burning. Two buttons and three indicator lights, easy and fast to operate. Using mainstream MMCX antenna interface and GH 1.25-6P cable interface, installation hole position of 30.5x30.5mm.

Features:
- 2500mW high power, stable operation, suitable for long-distance flight.
- The seaside non-interference pull distance test is about 10KM.
- 6 adjustable power levels: PitMode/25mW/200mW/600mW/1600mW/2500mW.
- A good two-layer board heat dissipation structure separates the power BEC from the main control, reducing interference and shielding interference.
- Temperature control protection function to prevent high-temperature burning.
- Wide voltage input, supporting 7-36V voltage input.
- Possessing 3 regional frequency groups to meet various regional usage needs.
- VTX control protocol IRC Tramp, supporting OSD parameter tuning.
- VTX onboard microphone, real-time transmission of aircraft sound to the ground.
- Two function buttons and three indicator lights, easy and fast to operate.
- Installation hole position supports 30.5x30 5mm.

Specification:
- Product name: RAD VTX 5.8G 2.5W VTX
- Input voltage: DC7-36V (2-8S battery, which is not included)
- Output voltage: 5V at 600mA (5V power supply for camera)
- Input impedance: 75ohms
- Protocol: IRC Tramp
- Antenna interface: MMCX
- Pin cable interface: GH 1.25-6P
- Output power: PitMode/25mW/200mW/600mW/1600mW/2500mW
- Frequency group: universal area frequency group (40CH), for American FCC frequency group (37CH), for European EU frequency group (26CH)
- Video format: PAL/NTSC
- Microphone: built-in microphone
- Installation hole: 30.5 x 30.5mm (M3)
- Size: 36.5 x 36.5 x 12mm
- Net weight: 15g (VTX only)

Package Included:
- 1 x GEPRC RAD VTX 5.8G 2.5W
- 1 x MMCX Straight Connector 72mm Copper Column Antenna
- 1 x GH 1.25 6P 150mm Connection Cable
- 1 x MMCX Elbow to SMA Female Feeder Line 82cm
- 1 x Screw Pack

Note:
- Battery is not included.
- Install the antenna before use.
- If the VTX is overheated, it will activate temperature control protection and automatically reduce power. Please ensure a good ventilation environment and heat dissipation during use. When the environment is limited, a cooling fan can be installed for VTX.
- The 5V output is only used for cameras. It is prohibited to connect the power input to the 5V output port, otherwise it will damage the VTX.