H250 LRC250 UAV 250mm 4-axis Quadcopter Aerial Remote Controlled Multicopter Frame Kit

H250 LRC250 UAV 250mm 4-axis Quadcopter Aerial Remote controlled Multicopter Frame Kit

Description:
The aircraft is not equipped with the propeller when you got it. The motor is two pairs of positive and negative threads, black propeller clip is the negative thread, which needs to be fitted with a clockwise rotation of the paddle. While the red propeller clip is the positive thread. Which needs to be fitted with a counter clockwise rotation. The oar must be set tightly in order to avoid accident.

Note: When supplying the power to the remote, the accelerator needs to be pulled down, and is the lowest all toggle switch to to dial, or remote control will issued a warning and can not boot.

When the propeller installed, place it in relatively flat ground, set the battery and wait for a while. The remote control is the default as left accelerator and steering, the right aileron and pitch. The default unlock is the accelerator that to be set in the lowest, the direction hit the right. After the release, waiting for the four axis calibration is completed, gently push the accelerator, the aircraft will take off. Since the aircraft has only self-stabilizing function, there is no automatic hovering, so it is time to control the aircraft in flight when flying.

Direction for using:
- Please be careful to avoid bumping into people, animals and goods when flying. It's better use it in the open area
- Not suitable for children under 14 years old.
- When flying, the aircraft flight control is not less than 1 meters, so that to avoid injuries;
- Novice flying height  is better that no more than 15 meters
- Don't fly in windy weather

Specification:
- Motor: 2280kv
- Battery: lipo 1800mah 3s 25 degree ce
- Propeller：5030 doub