Happymodel Toad 90 Micro Brushless FPV Racing Drones F3 DSHOT Frsky Flysky DSM2 X BNF

Happymodel Toad 90 Micro Brushless FPV Racing Drones F3 DSHOT Frsky Flysky DSM2 X BNF

Product Description:
- Happymodel Toad 90 Brushlessv FPV racing drones F3 DSHOT BNF three receiver options:
- Frsky D8 receiver version,support Frsky X9D PLUS X7D and other remote controller DFT DJT extended tuner
- DSM2/DSMX receiver version,support Horizon hobby DX6I/DX8/DX9,Huakeer D7E/DEVO10 support DSM/DSM2/DSMX protocol remote controller
- Flysky AFHDS 2A receiver verion support Flysky Foose I6/I6S/I6X/I10 Eachine I6 Turnigy Evolution

Specifications:
- Brand Name: Happymodel
- Item Name:Toad 90 Micro FPV RACING DRONES BNF
- Size:115mm*115mm*50mm
- Weight: 69g( battery not include)
- Flight controller: Betaflight F3 Flight controller built-in OSD
- Motor: Happymodel 1104 KV7500 brushless motor
- Propeller: 50mm 5-blades propeller
- Camera: 600TVL HD CMOS 1/4inch
- VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
- Battery: 7.4V 450mah 80C lipo battery
- OSD: Betaflight OSD
- Firmware of Flight controller:Betaflight 3.1
- Flight time : 3-4minutes
- Buzzer Ready

BNF version Receiver Option:
- Frsky D8 modee SBUS receiver (RSSI ready)
- Flysky 8ch AFHDS 2A receiver
- Specktrum DSM2/DSMX Compatible receiver

Flight controller Specification:
- Size:27mm*27mm*5mm
- Mount hole: 20mm*20mm
- Processor: STM32 F303 MCU
- Sensor: SPI Sensor MPU6000
- Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
- Firmware version: Betaflight 3.1 Dshot ready
- Target: Omnibus

ESC specification:
- Size:27mm*27mm*5mm
- Mount hole: 20mm*20mm
- Firmware version: BLHELI_S 16.5
- BB2, 48MHZ Chip
- Lipo Battery: 1-2S
- Con. Current: 10A
- Peak Current: 15A (10S)
- BEC: 5V @0.1A
- Programming: YES
- Betaflight passtrough ready
- Dshot600 ready(Default)
- Support oneshot42 oneshot125 Multishot Dshot
- Damped light on

Features:
- Extremely light and more powerful
- STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
- Adjustable Angle of Camera
- Jaw-dropping flight performance
- Betaflight support
- Acro mode / Air mode /Angle mode support
- Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
- OSD Configuration has been include in BETAFLIGHT GUI
- Radio Stick to control PID Tunes
- BLEHELI_S pass-through ready
- Telemetry RSSI Output ready

Note:Toad 90 kit is adjusted before leaving the factory.Customers just need to frequency bindings with correspondingremote controller.

Package included:
- 1 x Happymodel Toad 90 Frame kit
- 1 x Betaflight F3 6DOF flight controller build-in OSD
- 1 x Frsky/DSMX/Flysky AFHDS2A Receiver(optional)
- 4 x Happymodel 1104 7500KV brushless motor
- 1 x BS410 10A BLHELI_S 16.5 2-3S 4 in 1 ESC Dshot600
- 4 x 50mm 5-blades propeller CW
- 4 x 50mm 5-blades propeller CCW
- 1 x 600TVL HD CMOS 1/4 inch  camera
- 1 x 5.8g 25MW 48CH NTSC/PAL VTX
- 1 x 7.4V 450mah 80C lipo battery
- 1 x Buzzer
- 4 x Propeller guards