• High Performance USB Noise Filter for Power Regeneration and Signal Reforming USB Processor 300mA
  • High Performance USB Noise Filter for Power Regeneration and Signal Reforming USB Processor 300mA

High Performance USB Noise Filter for Power Regeneration and Signal Reforming USB Processor 300mA

Availability: Out Of Stock

  • Price:$95.24
  • Price in reward points: 952 Reward Points: 10
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $93.34 $91.43 $88.57 $84.76 Contact US
Quantity:

You might like

  • $0.00
  • $0.00
  • $0.00

High Performance USB Noise Filter for Power Regeneration and Signal Reforming USB Processor 300mA

Description:

- The output current of standard version is 300mA, and most of the USB interfaces consume less than 200mA, so the standard version is suitable for most users.
- It is a USB active processor. This product is an active type, which is actively processed by active devices. Its structure is more complicated, and it is a bit like a car whose power is not limited by whether the driver is strong enough.

Functions:
- Power Regeneration. The USB power supply of ordinary computers is very poor, and the noise usually reaches about a few mV. But the power supply of the this noise filter regenerates the power from the USB, and then processes it again. The noise level of the power supply after regeneration is 8uV, which is 3 orders of magnitude better than the power supply before regeneration, which is about 1000 times.
- USB signal reforming. Due to the complex electromagnetic environment and power supply quality inside the computer, the USB signal provided by the computer itself is also quite poor, and a lot of interference and jitter are superimposed on it. It receives the USB signal and stores it in the local cache, and then uses the local high-quality clock to rearrange the USB signal and send it out.
- When using this product, please pay attention to place it directly close to the computer. The cable from the computer's USB output to it is as short as possible. If possible, it is recommended to plug it directly into the USB output of the computer. A 10CM USB extension cable is included in the packaging list. If you can't plug it directly, you can use this extension cable to connect.
- It does not need a driver itself, but some devices need to reinstall the driver after passing through it.
- It can not only be used on the USB interface, any USB2.0 device, such as mouse and keyboard, can pass through it, and it will have a little improvement effect on the entire for PCHIFI system.

Package Included:
- 1 x USB Noise Filter


Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha