1.2GHz–1.7GHz 12W RF Power Amplifier RF Power Amp with SMA Female Connector (without Cooling System)

1.2GHz–1.7GHz 12W RF Power Amplifier RF Power Amp with SMA Female Connector (without Cooling System)

Important Notes Before Purchase:
* When using an antenna for transmission, make sure to select an antenna with a VSWR below 2 at the corresponding frequency.
* Always connect a load to the output before applying DC power. Operating the module without a load may cause damage.
* This power amplifier module is a bare board and does not come with a cooling system. Buyers must ensure proper heat dissipation. The cooling system should have a heat dissipation capacity of no less than 20W.

Specifications:
* Operating Frequency: 1200MHz – 1700MHz
* Input/Output Impedance: 50Ω
* Maximum Input Power: 3dBm at 2mW
* Output Power: 10W at 24V DC, 12W at 28V DC
* Power Supply Voltage: 24V–28V (24V recommended)
* Operating Current: 1.5A–2A (varies with frequency and supply voltage)
* Connectors: SMA female on both ends
* Enclosure: Sandblasted aluminum casing

Attention:
* Ensure the input (RFin) and output (RFout) ports are connected first, and only then connect the DC power supply.
* When supplying DC power to the module, make sure the positive and negative terminals are connected correctly. Do not reverse the polarity, as this can damage the module!

Packing List:
* 1 x RF Amplifier
    
Packaging Details:
* G.W.: 0.22kg