Di Thanksbuyer
ADAU1452 DSP Board Learning Board + AD1938 Audio CODEC Board 192KHz 24Bit with Schematic Diagrams
Prezzo di listino
$64.36
Prezzo di listino
Prezzo scontato
$64.36
Prezzo unitario
per
Imposte incluse.
Spese di spedizione calcolate al check-out.
Impossibile caricare la disponibilità di ritiro
Prezzo di listino
$64.36
Prezzo di listino
Prezzo scontato
$64.36
ADAU1452 DSP Board Learning Board + AD1938 Audio CODEC Board 192KHz 24Bit with Schematic Diagrams
Features:
- AD1938_CODEC decoder board added with a MCU for soft control, which can set the sampling rate and audio interface type.
- On-board routines provide input or output IIS/SPDIF (optical fiber/coaxial selection) interface.
- Factory setting is 192K_TDM format, OUT3 / OUT4 are pass-through interfaces, and OUT1/OUT2 is the output interface in stereo divide-by-2 mode.
- S1 Button: Input selection. Blue light flashes for SPDIF input, red light for IN2 analog input, and green for IN1 analog input.
- S2 Button: Preset EQ switch. A total of 10 EQ presets.
- S3 Button: Super bass switch. Useful in electronic crossover subwoofer channel, it is turned on by default.
- Three-color LEDs respectively display input channel and working status by flashing.
- One STM32 MCU is reserved on the board, and the MCU can be selected to control DSP, and USB/UART/SPI port can be reserved. It can also be used as a MCU development board.
- Potentiometer ADC collection for volume control, LED drive example.
Package Included:
- 1 x DSP Board + CODEC
Features:
- AD1938_CODEC decoder board added with a MCU for soft control, which can set the sampling rate and audio interface type.
- On-board routines provide input or output IIS/SPDIF (optical fiber/coaxial selection) interface.
- Factory setting is 192K_TDM format, OUT3 / OUT4 are pass-through interfaces, and OUT1/OUT2 is the output interface in stereo divide-by-2 mode.
- S1 Button: Input selection. Blue light flashes for SPDIF input, red light for IN2 analog input, and green for IN1 analog input.
- S2 Button: Preset EQ switch. A total of 10 EQ presets.
- S3 Button: Super bass switch. Useful in electronic crossover subwoofer channel, it is turned on by default.
- Three-color LEDs respectively display input channel and working status by flashing.
- One STM32 MCU is reserved on the board, and the MCU can be selected to control DSP, and USB/UART/SPI port can be reserved. It can also be used as a MCU development board.
- Potentiometer ADC collection for volume control, LED drive example.
Package Included:
- 1 x DSP Board + CODEC