Prezzo di listino
$248.96
Prezzo di listino
Prezzo scontato
$248.96
Available Packaging Options:
* Eco Packaging (Without Carrying Case)
* Premium Packaging (With Carrying Case)
Friendly Reminder:
The LPT2000 Series and LPT3000 Series Low-Power Test Analyzers are specifically designed for battery-powered applications. They adopt a passive measurement approach and do not provide power to the external target board through their output terminals. Users must supply an external battery to power the target board when setting up the test environment.
Many low-power devices are powered by batteries, especially coin cell batteries, which are not ideal power sources and have inherent internal resistance. As the battery charge decreases, its internal resistance increases further. In other words, an ideal regulated power supply cannot accurately simulate the changes in internal resistance that occur under actual battery-powered conditions. This can lead to battery voltage decline and voltage sag under high-current loads, affecting the stability of the target circuit board under test.
For example, if the target board has an internal DC-DC converter, as the battery charge decreases, the battery's internal resistance increases and its voltage drops. To maintain a stable output voltage, the DC-DC converter draws more current than it would when the battery is fully charged, thereby accelerating battery depletion.
Failure Case: A low-power product powered by a coin cell battery was initially designed and tested using a regulated 3V power supply. The power consumption test results were satisfactory, and the estimated battery life was 3-5 years. However, after mass production, no issues were observed during the initial period of operation. Nearly one year later, a large number of products began experiencing abnormal and rapid battery depletion.
After analysis, it was found that the batteries had poor performance, with their internal resistance becoming excessively high over time. This resulted in excessive voltage sag and a significant increase in operating current. Consequently, the MCU repeatedly reset due to low voltage and could not enter sleep mode, leading to rapid battery depletion. These issues would not have occurred during testing if a regulated power supply had been used throughout.
Therefore, to obtain realistic power consumption results under actual battery-powered conditions while also evaluating battery characteristics, testing with an actual battery as the power source provides the most representative results.
LPT3000 Series Overview:
The LPT3000 Series Low-Power Analyzer is specially designed for electronics engineers to measure power consumption, evaluate battery characteristics, estimate battery life, and perform other related tests on electronic products. It is particularly well suited for products with standby currents in the micro-amp (µA) range.
The engineers behind this product have nearly 20 years of experience in the design, development, and manufacturing of electronic products, with extensive expertise in fields such as the Internet of Things (IoT), where power consumption requirements are exceptionally stringent. Drawing on years of practical experience and addressing the challenges encountered in real-world applications, we developed this product with the belief that technology should be more human-centered. Our goal is to provide engineers with a product that is affordable, easy to use, and reliable.
Product Features:
* Compact, lightweight design that fits easily into a briefcase for convenient portability.
* Low power consumption; powered and connected directly through a computer's USB port.
* USB power isolation design prevents harmful ground loops and unwanted power paths.
* Advanced dynamic self-calibration algorithm ensures optimal performance under varying environmental conditions.
* Hardware sampling rate of up to 100Kbps.
* Ultra-low closed-loop noise current of less than 5nA, providing a clean testing environment for low-power measurements.
* Current resolution as low as 1nA for highly precise measurements.
* Voltage drop of less than 50mV at currents below 500mA.
* Dashboard-style software interface presents test data clearly and intuitively, requiring no complicated operations.
* Direct battery life estimation for quick and convenient test evaluation.
* Buzzer-based current alarms and over-current protection help safeguard your test devices.
* Save and retrieve test data for convenient access to historical measurement records anytime.
* Automatically generates test reports, making testing simpler and more efficient.
Applications:
* Low-Power Testing and Analysis of IoT Devices
* Current Data Logging and Analysis
* Voltage Data Logging and Analysis
* Battery Life Analysis and Estimation
* Battery Voltage Sag Characterization
* Power Consumption Analysis of General Electronic Products
* Abnormal Current Analysis in Electronic Products
* Power Consumption Analysis on Electronics Production Lines
Packing List:
Eco Packaging (Without Carrying Case):
* 1 x LPT3010-PLUS Analyzer
* 1 x 4mm Black Test Lead with Alligator Clip
* 1 x 4mm Red Test Lead with Alligator Clip
* 1 x 4mm Blue Test Lead with Alligator Clip
* 1 x USB Data Cable
Premium Packaging (With Carrying Case):
* 1 x LPT3010-PLUS Analyzer
* 1 x 4mm Black Test Lead with Alligator Clip
* 1 x 4mm Red Test Lead with Alligator Clip
* 1 x 4mm Blue Test Lead with Alligator Clip
* 1 x USB Data Cable
* 1 x Carrying Case
Package Weight (Varies by Selected Packaging):
* Eco Packaging: 0.75kg
* Premium Packaging: 1.46kg
Note:
* Batteries and other items are not included in the package.


